FlipFlop KingStone 32 GB

hello every one , 

i have a 32 GB kingstone flash memory , and i want to use it as a basic disk , its removable now . 

also if you have articals that explane flashmemory table and staff like that please send me the link . i like to read alot in order to know better . 

i know some about bios and harddisk booting but i know nothing about flash memory . 

here is what i know about HDD booting 

http://www.multiboot.../multiboot.html

thx .

Do you want to "flip the bit"?

I.e. making it "fixed" instead of "Removable"?

Start by following this:

http://reboot.pro/to...n-datatraveler/

Find and provide the info about your specific device, as in:

http://reboot.pro/to...veler/?p=188703

BUT

There is NO NEED normally to flip the removable bit, in most cases it is unneeded, and in a few you can use a filter driver to have the devices seen as fixed in Windows NT based OS's:

http://agnipulse.com...d-disk-windows/

Wonko

i have tried to use filter driver + its only working at 32 bit , but i want to make the flash ,  fixed or basic like the hard disk . 

i will read the articals you sent and i will provide the required information .

Edited by Abdo Refky, 31 December 2014 - 11:47 PM.

USB Flash Info 

Volume: G:
Controller: Phison 2251-68
Possible Memory Chip(s): 
  Toshiba TH58NVG8T2JTA20
  Toshiba TH58TEG8T2JTA20
  Toshiba TH58TEG8T2JBA4C
  Toshiba TC58NVG7T2JTA00
  Toshiba TC58TEG7T2JTA00
Memory Type: TLC
Flash ID: 983AA892 7650
Chip F/W: 01.02.53
Firmware Date: 2014-03-05
ID_BLK Ver.: 1.2.68.0
MP Ver.: MPALL v3.30.00
VID: 0951
PID: 1665
Manufacturer: Kingston
Product: DataTraveler 2.0
Query Vendor ID: Kingston
Query Product ID: DataTraveler 2.0
Query Product Revision: PMAP
Physical Disk Capacity: 31466323968 Bytes
Windows Disk Capacity:  16097542144 Bytes
Internal Tags: 2Q6P-S74Q
File System: FAT32
Relative Offset: 31 KB
USB Version: 2.00
Declared Power: 200 mA
ContMeas ID: 1405-01-00
Microsoft Windows 7 x64
------------------------------------
http://www.antspec.com/usbflashinfo/
Program Version: 8.0.0.550

its 32 GB   chipeasy read only the windows partition . i have made four partitions and was going to use RMPrepUSB . 

but i am trying to flip flop it . is that possible for my flash ?

quoted from flash drive 

Physical Disk Capacity: 31466323968 Bytes
Windows Disk Capacity: 16097542144 Bytes

its no problem i can make it 1 partition any time its just for clearing . 

i dont want the filter drivers . i want to make the drive basic instead of removable . 

is my chip capable of doing that ?? 

very cool . 

i have found this link 

http://www.usbdev.ru...-fwmpall-n0928/

this link has 12 of my chip 

http://flashboot.ru/iflash/

this link have some tools too :

http://www.flashdriv...very-tools.html

here is some screen shots for new info and what programs i have , what is the next step . 

if you may i also need an artical that explain difference between grub4dos and others algonside explainning them . 

is there something you said i am missing so far ? 

i am lost between the tools and the articals .

wow .. i have tried to use fixed disk and it worked first time  . 

was it supposed to be that easy ? 

wow .. i have tried to use fixed disk and it worked first time  . 

was it supposed to be that easy ? 

Yes meaning that when it is easy (i.e. a "simplified" tool exists and works), it is very easy.

Wonko

may i know what does the UPTool do . 

can i make the 4 partitions visable at bios boot choosing ?

hey .

this flash memory suddenly truned to be write protected .  

i have tried attributes clear readonly ,,etc 

windows disk managment read it as not initialized . 

thanks 

Hmmm.

If it is not initialized it is not "read only" (or not only "read only" if you pardon me the pun) it means that the device is *somehow* malfunctioning.

The "not initialized" in Disk Management is caused by "Magic Bytes" (the two bytes at offset 510 or last two bytes in the MBR) are not 55AA.

Usually (but not always) doing a low-level format with the UPTool resets the device (but the current contents of the device will be lost forever).

If - besides the Disk Management issue - you can access the device's RAW sectors, it would be a good idea to make a dd-like image of the device (if it contains or contained valuable data).

Wonko

UPtool show nothing  

Help some one .

i dont care about any data just need wanna make it work . 

some photos . 

https://goo.gl/photo...k3yTkkugANG1fo6