1 reply to this topic

[DaDe]

Perhaps somebody can prompt, why there is no access to network resources.
Has created assemblage by means of Winbuilder ` and.
Has specified ip the address and a mask under networks by means of PENetCfg.
Access on a network to network resources is not present, and Icmp goes normally.
When you address to \\computer writes \\computer it is inaccessible, access is forbidden. Though anonymous access is resolved and not from PE Windows access is.
When you address to \\computer\share1 there is a window of input of the user and the password.
Even if you will enter a login and the password all are not present access.
P.S. Excuse for my English

[steelbone]

Hello,

this is not fixed until now.

there are lots of Dependencys on this Function. ;(

so we integrated

-Lanmanserver (supported for File-,Printer,- and Named-Piped-Shares.)

so but only with this it's not working ;(


i'am not quiet sure, but there are following services also necessary:

-netprofm, NlaSvc
- File- and PrinterShare for Microsoft-Network in the Probertys of the Lan-Connection
- so else may there also the Problem that the Firewall isn't completely deaktivated.
Netsh firewall set opmode disable

so but in this case the Firewall command in Netsh is not available over Vistape.
so the ICS is not completely integrated.

i played little bit around may to fix services. but i failed. therefore much more time is necessary ;(


Regards

Steel