How to get Vista PE to see USB Flash drives?
#1
Posted 07 November 2008 - 11:20 PM
#2
Posted 07 November 2008 - 11:28 PM
#3
Posted 08 November 2008 - 09:31 AM
mountstorpe can work with vistape!
(already in livexp project)
try
http://livexp.boot-l...ountStor.script
mountstore web:
http://www.kare-net.de/Plugins.htm
#4
Posted 10 November 2008 - 07:17 PM
Running HWPNP it does not help. Anyone know if there is a universal USB mas storage driver I can install? I believe there are no drivers for usb flash drives installed in the base vistaPE.
#5
Posted 11 November 2008 - 11:34 PM
Lancelot asked me to test and here's the result, working good hereIve added MountStorPE script to my VistaPE disk. When I plug in my usb flash drive and run MountStorPE in VistaPE it says 0 new partitions found.
Running HWPNP it does not help. Anyone know if there is a universal USB mas storage driver I can install? I believe there are no drivers for usb flash drives installed in the base vistaPE.
#6
Posted 12 November 2008 - 03:17 PM
Lancelot asked me to test and here's the result, working good here
Did you load any other drivers to get this to work? Ive loaded usb mass storage drivers but it does not help. I think the default Vista PE drivers script does not load USB chipset drivers and maybe that's why the flash drive does not show up (even in device manager)
#7
Posted 12 November 2008 - 03:38 PM
Often plugging it in before booting works.
OK so this works, if I plug in the usb flash drive before boot up and keep it in it shows up and can be removed and when re-connect to usb again it finds it.
Why wont vistaPE find a USB mass storage device if it is not plugged in before boot up? this makes no sense.
#8
Posted 12 November 2008 - 05:00 PM
Well, it may make no sense to you, but it makes sense in some fashion. I can't explain it. But it's pretty much SOP for systems booted from CD or equivalent. Making it otherwise has consumed a large amount of developer's time, and obviously they aren't finished yet.Why wont vistaPE find a USB mass storage device if it is not plugged in before boot up? this makes no sense.
#9
Posted 13 November 2008 - 12:59 PM
Hi,Ive added MountStorPE script to my VistaPE disk. When I plug in my usb flash drive and run MountStorPE in VistaPE it says 0 new partitions found.
I have the same problem.
By searching for a solution of this problem i find a script named "partition_find_and_mount" who allows me to "mount" connected drives such as USB-Sticks and USB-Harddrives and give them a Drive-Letter.
greetings
AfricaTwin
#10
Posted 13 November 2008 - 01:05 PM
Here is partition find and mount script from livexp project
http://lancelot.winb...d_and_mount.rar
#11
Posted 13 November 2008 - 03:22 PM
Hi,
I have the same problem.
By searching for a solution of this problem i find a script named "partition_find_and_mount" who allows me to "mount" connected drives such as USB-Sticks and USB-Harddrives and give them a Drive-Letter.
greetings
AfricaTwin
I have this on my VistaPE disk and it does not find my USB Flash drive
Only way I can get VistaPE to see a usb flash drive it to connect it before booting off the VistaPE disk
#12
Posted 13 November 2008 - 06:09 PM
Missed this yesterday, sorry (server mess) - No, I didn't add any drivers; I'm currently using vistape12b3 with the update pack from Markus Debus. I do include the uictl_v1.rar and devcon.exe files (usually downloaded during build but otherwise didn't change much. Sorry to say Markus (ctmag) seems to have pulled his very useful update pack and RC1 doesn't work for me at all (all old bugs are back with a vengeance), go figure.Did you load any other drivers to get this to work? Ive loaded usb mass storage drivers but it does not help. I think the default Vista PE drivers script does not load USB chipset drivers and maybe that's why the flash drive does not show up (even in device manager)
#13
Posted 13 November 2008 - 07:18 PM
Where can I get 12b3? I used 12RC1 and I couldnt even get it to boot! (stops at a20) so i have been using vistpe11Missed this yesterday, sorry (server mess) - No, I didn't add any drivers; I'm currently using vistape12b3 with the update pack from Markus Debus. I do include the uictl_v1.rar and devcon.exe files (usually downloaded during build but otherwise didn't change much. Sorry to say Markus (ctmag) seems to have pulled his very useful update pack and RC1 doesn't work for me at all (all old bugs are back with a vengeance), go figure.
#14
Posted 13 November 2008 - 08:47 PM
Sent links, hope that helps. btw, I use sp0 source (sp1 should also work) and WAIK installed at C: root. Check AddDrivers script if you need add'l drivers but don't forget to point to driver filesWhere can I get 12b3? I used 12RC1 and I couldnt even get it to boot! (stops at a20) so i have been using vistpe11
0 user(s) are reading this topic
0 members, 0 guests, 0 anonymous users