Run bartpe ISO in RAM
=============================================================================
HI
In this page i am going to talk about running BartPE ISO from Ram.I have uploaded
needed files as Needs.zip in attachment.It is essential to download that and use
it's files and folders during your exprement,If you do not use them,May be your ISO
will not work (Ofcourse they are not special files,i just placed XP 2003 sp1 files
inside needs.zip pluse other needed files).
I have tried this tutorial several times ,all were OK (Ofcourse my checks was
done by QEMU ).
Please do your first test of tutor,as i explained in steps below,then you can do it
by your favorite changes.
I suppose that you have installed "pebuilder 3.1.10a" in D:\PE\
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
Step_1:
----------
_.Run D:\PE\pebuilder.exe ,select your favorite plugins,Select output pathes
as figure_01 (see attachment).
_.Click build button.Program will Make files needed to make ISO in D:\PE\BartPE\ directory.
_.Close PEBuilder.
Step_2:
---------
_.Copy D:\PE\BartPE directoy to C:\,(so you will have C:\BartPE).
_.Delete files below from C:\BartPE\I386\ directory:
SETUPLDR.BIN
NTDETECT.COM
_.Copy SETUPLDR.BIN and NTDETECT.COM from needs folder (get from attachment) to
C:\BartPE\I386\ directory
_.Delete file RAMDISK.SYS from C:\BartPE\I386\SYSTEM32\DRIVERS\ directory and
copy RAMDISK.SYS from needs folder (get from attachment) to there.
_.Open C:\BartPE\I386\txtsetup.sif by notepad and add be sure that you have line
"ramdisk=ramdisk.sys" in [ScsiClass.Load] section.it should be some thing like:
[ScsiClass.Load]
cdrom = cdrom.sys
disk = disk.sys
floppy = sfloppy.sys
ramdisk = ramdisk.sys
Step_3:
---------
_.Copy RamPE folder from attachment to C: (you will have C:\C:\RamPE).
_.Open UltraIso ,select C:\BartPE\ contents to make iso (see figur_02),use file
C:\BartPE\bootsect.bin as boot loader.
_.Go to file in menue and click on properties,then in comming window (see figur_03),
uncheck "Allow lower case" and click on OK
_.Save ISO by the name of RAMPE in C:\RamPE\
Step_4:
---------
_.Copy mkisofs.exe (from attachment) to C:\
_.Run MakePE.bat (from attachment),it will make C:\PEB_ram.iso (183M in my exprement)
from contents of C:\RamPE folder.
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
xxxxxx
That is all,check that then burn it and enjoy.
Hope will help some
have nice times
shirin zaban