Jump to content











Photo
- - - - -

[LiveXP] "USB Mass Storage Devices" Problem!


  • Please log in to reply
41 replies to this topic

#26 Galapo

Galapo

    Platinum Member

  • .script developer
  • 3841 posts
  •  
    Australia

Posted 02 January 2008 - 01:24 AM

USBSupport defines an UpperFilter 'VolSnap' in 'CurrentControlSet\Control\Class\{71A27CDD-812A-11D0-BEC7-08002BE2092F}'

Hi Peter,

I'm just wondering where this is defined in the script. I cannot seem to find it in the actual script or in the encoded .reg file.

Thanks,
Galapo.

#27 pscEx

pscEx

    Platinum Member

  • Team Reboot
  • 12707 posts
  • Location:Korschenbroich, Germany
  • Interests:What somebody else cannot do.
  •  
    European Union

Posted 02 January 2008 - 08:58 AM

Hi Peter,

I'm just wondering where this is defined in the script. I cannot seem to find it in the actual script or in the encoded .reg file.

Thanks,
Galapo.

in attached .reg translate the hex into ASCII:
[HKEY_LOCAL_MACHINE\SYSTEM\ControlSet001\Control\Class\{71A27CDD-812A-11D0-BEC7-08002BE2092F}]

"UpperFilters"=hex(7):56,00,6f,00,6c,00,53,00,6e,00,61,00,70,00,00,00,00,00

"Class"="Volume"

@="Storage volumes"

"EnumPropPages32"="StorProp.Dll,VolumePropPageProvider"

"SilentInstall"="1"

"NoInstallClass"="1"

"Icon"="-53"

"Installer32"="syssetup.dll,VolumeClassInstaller"

Peter

#28 Galapo

Galapo

    Platinum Member

  • .script developer
  • 3841 posts
  •  
    Australia

Posted 02 January 2008 - 09:50 AM

Thanks for that Peter.

Strange thing is, I see I have a few different versions of the script laying around since I now see we were looking at slightly different scripts.

Version 10 is the one that is on the LiveXP server and has the UpperFilter in question defined: Attached File  USBSupport.Script   36.88KB   279 downloads

However, in a different local folder I see I have a version 12 which doesn't have it: Attached File  USBSupport.Script   21.66KB   259 downloads

Question is: is either of these functioning properly?

Regards,
Galapo.

#29 Galapo

Galapo

    Platinum Member

  • .script developer
  • 3841 posts
  •  
    Australia

Posted 02 January 2008 - 10:14 AM

And another question: does Thuun's rendition do better?

http://bartpe.boot-l...BSupport.Script

#30 Galapo

Galapo

    Platinum Member

  • .script developer
  • 3841 posts
  •  
    Australia

Posted 03 January 2008 - 10:08 AM

@larsm

I just tested v.12 of the USBSupport script and Paragon HDM8. I was able to perform partition resizing operations, partition creation, formatting, and drive letter assigning. It seems to me the script might be working fine as no reboot was required between any of these operations.

v.12 is now on the LiveXP server.

Regards,
Galapo.

#31 larsm

larsm

    Newbie

  • Members
  • 18 posts
  •  
    Germany

Posted 05 January 2008 - 01:05 AM

Thanks! It works! :cheers: :cheers:

#32 Galapo

Galapo

    Platinum Member

  • .script developer
  • 3841 posts
  •  
    Australia

Posted 05 January 2008 - 03:24 AM

Fantastic, good to hear! Thanks for reporting.

Galapo.

#33 MedEvil

MedEvil

    Platinum Member

  • .script developer
  • 7771 posts

Posted 15 March 2008 - 07:41 PM

Did anyone notice that HotPlug isn't working? At least not for USB-Sticks.

I'm pretty sure that this used to work at some time. :)

:(

#34 Galapo

Galapo

    Platinum Member

  • .script developer
  • 3841 posts
  •  
    Australia

Posted 15 March 2008 - 08:06 PM

Did anyone notice that HotPlug isn't working? At least not for USB-Sticks.

I haven't noticed because it still works for me!

Regards,
Galapo.

#35 MedEvil

MedEvil

    Platinum Member

  • .script developer
  • 7771 posts

Posted 15 March 2008 - 08:30 PM

I haven't noticed because it still works for me!

:) Really?
I extra downloaded LiveXP, build it without any Apps and it behaved just like naughtyPE. Devices pluged in during boot would show up, devices later pluged in, would not show up.

Are there any dependencies on other scripts?
Or are there known issues with certain chipsets?

:(

#36 Galapo

Galapo

    Platinum Member

  • .script developer
  • 3841 posts
  •  
    Australia

Posted 15 March 2008 - 08:40 PM

Are there any dependencies on other scripts?
Or are there known issues with certain chipsets?

I don't have an answer to either question. For me, usb stick not plugged in is able to be hot-plugged after boot. Same with usb mouse if using the other script for that (which has to be run after the usbsupport.script).

I think Thunn is taking a look at his own usb script again.

Regards,
Galapo.

#37 MedEvil

MedEvil

    Platinum Member

  • .script developer
  • 7771 posts

Posted 15 March 2008 - 08:56 PM

I don't have an answer to either question. For me, usb stick not plugged in is able to be hot-plugged after boot. Same with usb mouse if using the other script for that (which has to be run after the usbsupport.script).

I think Thunn is taking a look at his own usb script again.

Regards,
Galapo.

Thunn has build a fine new version, but it's stuck at the same point v12 is. That'S how i came to test the LiveXP script, in the first place.
So anyone else with a nForce chipset having troubles with hotplug too?
Or better with which chipsets is hotplug working?

:)

#38 Galapo

Galapo

    Platinum Member

  • .script developer
  • 3841 posts
  •  
    Australia

Posted 17 March 2008 - 05:20 AM

Just tried the rest of my USB drives and all are able to be hot-plugged:

Astone 1gb usb stick
Maxtor One Touch III 300gb external
Western Digital My Book ES 500gb external

Regards,
Galapo.

#39 dera

dera

    Gold Member

  • .script developer
  • 1335 posts
  •  
    Hungary

Posted 17 March 2008 - 08:06 PM

In LiveXP using USBSupport.Script Version=12 Author=Radoi Ovidiu,
an acronis script
and the AddRemoveUpperFilters.script Version=004
I noticed the following strange behaviour:
when I use the AddRemoveUpperFilters to remove and add PartMgr
in the reg entry SYSTEM\CurrentControlSet\Control\Class\{4D36E967-E325-11CE-BFC1-08002BE10318} UpperFilters
I can see this value: 'snapman PartMgr'
in this sort order
and in this case hot-plug does not work with my USB stick,
to be more precise: get the system tray icon but in the explorer window I cannot see my USB stick drive letter assigned
when change the sort order to 'PartMgr snapman' (as it is in the original plugin by Acronis) hot-plug works fine
Anyone noticed similar problem?

#40 Galapo

Galapo

    Platinum Member

  • .script developer
  • 3841 posts
  •  
    Australia

Posted 17 March 2008 - 08:24 PM

Thanks for reporting dera. I'll edit frodo's 'addremfilter' code to take this into account.

Regards,
Galapo.

#41 Galapo

Galapo

    Platinum Member

  • .script developer
  • 3841 posts
  •  
    Australia

Posted 18 March 2008 - 02:54 AM

New version of 'AddRemoveUpperFilters.script' has been uploaded which keeps 'PartMgr' at the front of the value.

Regards,
Galapo.

#42 dera

dera

    Gold Member

  • .script developer
  • 1335 posts
  •  
    Hungary

Posted 18 March 2008 - 02:44 PM

Thanks for the script!




0 user(s) are reading this topic

0 members, 0 guests, 0 anonymous users