Jump to content











Photo
- - - - -

Flash drive has an error


  • Please log in to reply
8 replies to this topic

#1 Sueco2003

Sueco2003
  • Members
  • 3 posts
  •  
    Portugal

Posted 27 April 2018 - 04:27 PM

Hello, my pen drive is unable to store files (because is write-protected). I have done everything since chkdsk and attr disk clear readonly. The only thing i have not done yet is the firmware reinstall. Well, my pens info is this: (hope you can help me)

 

Description: [E:]USB Mass Storage Device(JetFlash Transcend 16GB)
Device Type: Mass Storage Device

Protocal Version: USB 2.00
Current Speed: High Speed
Max Current: 200mA

USB Device ID: VID = 8564 PID = 1000
Serial Number: VTDUV2BQ

Device Vendor: JetFlash
Device Name: Mass Storage Device
Device Revision: 0100

Manufacturer: JetFlash
Product Model: Transcend 16GB
Product Revision: 8.07

Controller Vendor: Alcor Micro
Controller Part-Number: SC908SN/AU6989SN [E50E] - F/W 3F0C
Flash ID code: EC1AA8DE - Samsung K9ADGD8U0M - 1CE/Single Channel [TLC-8K] -> Total Capacity = 16GB

Tools on web: http://dl.mydigit.ne...l/up/alcor.html


Possible Flash Part-Number
----------------------------
[1CE]K9ADGD8U0M x 1 pcs/Channel x 1 Channel


Flash ID mapping table
----------------------------
[Channel 0] [Channel 1]
EC1AA8DE88C5 --------
-------- --------
-------- --------
-------- --------
-------- --------
-------- --------
-------- --------
-------- --------
 



#2 Wonko the Sane

Wonko the Sane

    The Finder

  • Advanced user
  • 16066 posts
  • Location:The Outside of the Asylum (gate is closed)
  •  
    Italy

Posted 28 April 2018 - 08:28 AM

You can try to re-set it.

You need to get the suitable Alcor utility (you will need to make some experiments).

 

The tools are here:

http://www.usbdev.ru/files/alcor/

 

A simple tutorial is here:

http://www.usbdev.ru...alcormp-repair/

 

You should try at first the modified (simplified) version by nat27:

http://www.usbdev.ru...lcor/alcormpmd/

 

use Google translate, the site is in Russian, but it translates rather well.

 

If you have data on the stick, if you can back it up (i.e. if the stick works read-only) back it up, the procedure (if successful) will wipe contents.

 

:duff:

Wonko


  • Jack1 likes this

#3 Sueco2003

Sueco2003
  • Members
  • 3 posts
  •  
    Portugal

Posted 28 April 2018 - 02:59 PM

You can try to re-set it.

You need to get the suitable Alcor utility (you will need to make some experiments).

 

The tools are here:

http://www.usbdev.ru/files/alcor/

 

A simple tutorial is here:

http://www.usbdev.ru...alcormp-repair/

 

You should try at first the modified (simplified) version by nat27:

http://www.usbdev.ru...lcor/alcormpmd/

 

use Google translate, the site is in Russian, but it translates rather well.

 

If you have data on the stick, if you can back it up (i.e. if the stick works read-only) back it up, the procedure (if successful) will wipe contents.

 

:duff:

Wonko

Hello! I tried many versions but when i click start, it says:

 

30500: No support flash error

Bad Block: 0/0

 

When I launch the program, the flash appears like that:

 

K9ADGD8U0M (Tog) Cap: 14908.0M

ID:EC,1A,A8,DE,88,C5 CE:1 (N/A)



#4 Wonko the Sane

Wonko the Sane

    The Finder

  • Advanced user
  • 16066 posts
  • Location:The Outside of the Asylum (gate is closed)
  •  
    Italy

Posted 28 April 2018 - 05:34 PM

Which OS are you using?

 

Better if you can try on a XP and 32 bit.

 

But the kind of error seems more (if you check the .ru forum you will find many similar cases) that the utility version you are using is not suitable for the specific stick.

 

As said you will need to make a lot of experiments, sometimes the "right" utility is very difficult to find (or cannot be found at all), if the ned27 versions didn't work, try the "Classic" ones (more recent than the lates ned27 version):

http://www.usbdev.ru.../alcor/alcormp/

 

Mind you it is also well possible that the stick is beyond repair, but no way to know which is the case.

 

:duff:

Wonko



#5 Sueco2003

Sueco2003
  • Members
  • 3 posts
  •  
    Portugal

Posted 01 May 2018 - 02:50 PM

I am using Windows 7 Ultimate SP1 32-bit...



#6 Blackcrack

Blackcrack

    Frequent Member

  • Advanced user
  • 458 posts
  •  
    Germany

Posted 02 May 2018 - 04:24 AM

grrrcchh, i have wrote a couples lines.. humpf and the page was reloaded..
how ever ..

XP have a couples strings where have Win7 and up never and
the most programs be programmed on WinXP and works on it 100% mostly,
this is why Wonko told , you should use WinXP (or reactos ;) )

take virtualbox with the vboxaddons, install XP, add your usb-stick/device on the
vbox if works and try out.

there also an couples tools :
http://www.blackysga...older-root/usb/
humm, why do you not kick out the stick in the trash and buy with 8 Euro or maybe 8 Bug's
a new one ? But from the technical part it's also interesting to try out...

best regards
Blacky

#7 Jack1

Jack1
  • Members
  • 2 posts
  •  
    Brazil

Posted 21 December 2019 - 11:32 PM

I used "ALCOR_U2_MP" at first and got the same error (30500: No support flash error

Bad Block: 0/0). But it worked when I used "AlcorMP_UFD". You can find all the download links here. https://www.usbdev.r.../alcor/alcormp/


Edited by Jack1, 22 December 2019 - 12:10 AM.


#8 Jack1

Jack1
  • Members
  • 2 posts
  •  
    Brazil

Posted 22 December 2019 - 02:31 AM

AlcorMP_UFD 09/12 / 26.00 D3 / eD3*


Edited by Jack1, 22 December 2019 - 02:38 AM.


#9 Blackcrack

Blackcrack

    Frequent Member

  • Advanced user
  • 458 posts
  •  
    Germany

Posted 22 December 2019 - 03:15 PM

why do you posting on a old Tread ?
My Posting was :   02 May 2018
 
let this tread rest in peace !






0 user(s) are reading this topic

0 members, 0 guests, 0 anonymous users