Jump to content











Photo
- - - - -

BSOD 7b Pavilion G6

pavilion g6 bsod sata driver

  • Please log in to reply
3 replies to this topic

#1 Motasem

Motasem

    Frequent Member

  • Advanced user
  • 169 posts
  • Interests:War Make's Men And Problems Make's You Expert
    MooT®
  •  
    Jordan

Posted 22 July 2013 - 07:57 PM

Hello every one

im facig a BSOD 7b when trying to install xp from usb ...

after setup loading files i have BSOD and i think its sata driver is not correct

i googled alot and search for the motherbored AHCI model and find by using CPU-z that the south bridge is 

( id1e59 )

 

i have used Firadisk WinVblocK and all the intel drivers listed under it and nothing works
 

note: there's no option to change the Harddisk mode from bios ( ahci native legacy etc etc )

 

any one can help with the driver ?



#2 Wonko the Sane

Wonko the Sane

    The Finder

  • Advanced user
  • 13752 posts
  • Location:The Outside of the Asylum (gate is closed)
  •  
    Italy

Posted 23 July 2013 - 09:16 AM

Can't you get the driver for the specific machine model? (even if it is for another OS it will provide the needed info to search for an XP one).

Pavillion G6 is only slightly more precise than "a HP notebook", there are TENS (actually HUNDREDS) of models :
http://h20000.www2.h...rod=Pavilion G6

Post the EXACT model, please or a link to the specific HP driver support page.

:cheers:
Wonko



#3 Motasem

Motasem

    Frequent Member

  • Advanced user
  • 169 posts
  • Interests:War Make's Men And Problems Make's You Expert
    MooT®
  •  
    Jordan

Posted 24 July 2013 - 07:21 PM

im not asking for the windows driver im talking about the hard disk driver whwen trying to install windows i have mention that i have tru Firadisk and winvblock and didnt detect the HDD

the model g6 2288ee



#4 ilko

ilko

    Silver Member

  • Advanced user
  • 500 posts
  •  
    Bulgaria

Posted 24 July 2013 - 09:58 PM

You need SATA/AHCI driver for the disk controller, not for the disk itself.

 

The hardrwareID of the controller seems to be VEN_8086&DEV_1E03 if I am not mistaken. The driver on HP site doesn't seem to support XP.

 

However, you should be able to get it going by integrating BTS mass storage driver pack in your source which includes the needed driver,  or if already using XP Setup from ISO with help of FIradisk/WInVBlock, the edited by Steve DPMS which would also load Firadis/WInVBlock in a virtual floppy along with the needed driver:

http://reboot.pro/to...xp-txtsetupoem/

http://reboot.pro/to...e-2#entry174714

http://www.rmprepusb.../e2bv1/dpms_srs






0 user(s) are reading this topic

0 members, 0 guests, 0 anonymous users