http://www2.zshare.ma/6v8xbebydb73
if this link does not work then I give up, just too much agravation.
Yep, this time it "went through"
.
I see how it is difficult to have things done EXACTLY.
Your %SourceDir% is C:\7-source, you were asked to use:
6. use the folder C:\Win7source to extract the Windows 7 iso
Your ºseDir% is C:\winbuilder, you were asked to use:
7. use the folder C:\Win7pe (as in the guide) to expand the package
Mind you 99% probabilities are that the above changes have NO influence whatever on the failure or success, but if you are asked to do something EXACTLY or "to the letter" you should do
as told (there are so many variables that checking the accuracy with which you replicate steps because you introduce your changes - no matter how trifling they may be - would become impossible).
The issue is at the very beginning of the run:
DirCopy - Failed to copy directory [ºseDir%\Projects\Tools\x86\*.*] to: [ºseDir%\Projects\Tools]: Unknown error
"translates" to:
Failed to copy directory [C:\winbuilder\Projects\Tools\x86\*.*] to: [C:\winbuilder\Projects\Tools]: Unknown error
which may mean that you have not write privileges to the target folder or that you cannot access the source one or that you did not right click on Winbuilder.exe and select "Run As Administrator", that your Antivirus is interfering with the execution of the program (if this is the case, disconnect, i.e. physically remove your net cable and disable the antivirus before trying again, remember to re-enable it before re-connecting to the internet)...
Please try again, start from clean, i.e. exit windows, switch the PC off, switch it on again and try following the steps in the instructions exactly (the reboot is advised because it may happen that something remains loaded from previous unsuccessful run).
AND from the log, you are still using the EzPE3 project, and NOT the
al_jo's one, you know like:
1. FORGET (temporarily) whatever you have read, or done.
2. Start form scratch
3. use the al_jo's project
Which is this one:
http://reboot.pro/to...ivirus-project/namely you want to use the "lite" version,
this file:
http://al-jo.net46.net/7pe_lite.zip Wonko