5 replies to this topic

[ylafont]

I startet to have a problen recently where the WimBoot Script does not create the ISO files of the project when executed. i have revied the log and found nothing idication there is a problem I found some post relating to this but there was no solution with the topic. does anyone have a clue?


Tried to attached log, but no option allowing me to do so. thanks in advance.

[amalux]

Tried to attached log, but no option allowing me to do so. thanks in advance.

Hi ylafont

After 100+ posts you can attach directly; until then you need to pack up log.html with http://www.7-zip.org/ etc. and upload to a (free) hosting site like http://www.mediafire.com/ then give us the link here.

[ylafont]

Thanks for the info, Here is a link to the latest log, reinstalled today and downloaded all the scripts again to see if i picked anything else. I can create the iso with the CREAT ISO script. Whhen i use WIMBOOT, winbuilders created the wim files and says it is creating the iso file but does not. LEt me know what you find in the log, thanks for your assistance.

http://www.mediafire...sh06chcg8j83izo

[amalux]

This log is only for WimBoot script run, this won't help. We need the log for the whole enchilada (big blue button). You may have inadvertently overwritten the original by trying to re-run WimBoot script (small green button); this would work to create your ISO if everything else were correct in your build but obviously it's not. Try build again from scratch and re-submit the complete log.

Make sure to supply the needed files for WimBoot script:



--
If you built successfully with CreateISO and then tried to run just WimBoot script on that build I don't think it will work (I've never tried it). You can get one of the projects from http://reboot.pro/4111/ which are pre-setup for what you want and compare what's different/missing in yours.

[ylafont]

after spending two days on this, I think I figured out the problem I guess I should have know better. The "Volume Label" on the on the WimBoot script had a space included it its name.

The last few test I performed seemed to indicate that was the problem. This was on lx78sp6cxw build. The strange thing was that there was no error posted and CreateISO was able to make the iso without a problem which threw me off. I am going to try it on full build with winbuilder later on.

To answere your last question, usually, I build the project once completely. Then I just run each individual script when I make changes. As long as each scrips meets all its requirement is able to rebuild quickly. I just tried it with CreatISo and WimBoot wihtout a problem (at least that i know of), is it not supposed to work in that manner? it just seemed logical to me, or should I be rebuild the entired project each time before an ISO is create?

Thanks for the the assistance! you guys rock!

[amalux]

Thanks for pointing this out; I'll put a warning in the script interface to save others the trouble.