28 replies to this topic

[2aCD]

Hi friends,

I have update my script for the integration of SRD from Norton Ghost 15 into Win7PE.
You needs a licensekey from Norton Ghost 15.
With the Norton Ghost from Service Recovery Disk you can easy backup and recover your PC with the v2i-format.

Now I have redesigned the script also for use with x64 source

The script you can download from downloadcenter:

reboot.pro->downloads->winbuilder->appscripts->NortonGhost 15 SRD

This Topic is closed, Please use the new topic in future:

http://reboot.pro/15804/

regards
2aCD

[Max Gilb]

Hi,

I would like the shows my script for the integration of SRD from Norton Ghost 15 into Win7PE.
You needs a licensekey from Norton Ghost 15.
With the Norton Ghost from Service Recovery Disk you can easy backup and recover your PC with the v2i-format.

Here you can download the script:

[attachment=11824:NortonGhost 15 SRD.7z]

and here the required folder with programfiles (Its modified from original).

NortonGhost 15 SRD-ProgramFolder

Select the extracted folder 'NortonGhost15_SRD' in script and put the licensekey into the textbox. Then select the same language as you source. Thats all.

I have test it with Win7PE_SE, engl. and german source x86.

Now you can test it.

regards
2aCD

Hi,

I tried to use the script with Win7PE-SE from February 2011 and with the pcwWin7PE_R2_2.2 Projekt.
Within the Win7PE-SE Project everything works fine, as long as the Host's drive letter uses Y: for the booting CD-drive with the Win7PE-SE disk. When i start Ghost from the Project-CD, it seems to look for all fixed drive letters on the Host-installation and reassigns all drive letters in the Win7PE-SE environment according to the host-installation. If the host's drive letter for the booting Cd-drive was fixed with any other drive letter than Y:, all programs will not start anymore, if they expect to have the project - CD in drive Y: - Ghost 15 included.

I had no success in using the Script with pcwWin7PE_R2.2: When starting Ghost from the disk a SreShell.exe-Window gave the folling text:

Fehler in Anwendung Die Anweisung in 0x0043152c verweist auf Speicher 0x025c0e6c. Der Vorgang konnte nicht im Speicher durchgeführt werden.

In a second call the Symantec Recovery Disk - Window gave the following message:

Fehler ECA31A9: Failed to find any files in directory X:\windows\system32\config\systemprofile\AppData\Local\Temp that match the pattern extension.*.xlm

Indeed: this directory doesn't exsist, instead an emty directory named ..\tem
Could there be any typing-error in the script or somewhere else, leading to this error?

Any ideas to fix the problem?

Regards

M.G.

[2aCD]

Hi Max Gilb,

I don't know the project pcwWin7RE. I do not know how relevant it is, if there is uptodate. I can't give support for this project.

For Win7pe-se it should work. I have test it also with no fixed driveletters for CD-ROM. Do you use in additional to script the programfolder from Downloadlocation? I have modify it for running with this script.

best regards
2aCD

[Max Gilb]

Hi,

pcwWin7PE_R2.2 is the Win7PE - Project with a few modifications by PC-Welt. I will try it again with the unmodified project on next weekend.

Today I have tested the Win7Pe_SE build again with no fixed CD-Drive letter on the host system and it worked fine. Obviously my problem only occures in Win7Pe_SE, if the host System uses a fixed drive letter different from Y: for the CD-Drive. If the CD-Drive hasn't got any assignment, or the assignment is Y:, everything works fine.

Is there any way to prevent Ghost from reassigning the drive letters according to the hosts adjustments?

By the way, I used your modified program-folder because the script couldn't find any files on my original Ghost-CD.

Thank you for the quick answer above,

with best regards

Max Gilb

[2aCD]

Hi Max Gilb,

please try using the following: Set 'Run from Ram' and build the CD. At runtime you can modify the Ghost Programfolder
X:\Program files\norton...
Many xml-files are in the programfolder.
Here you can test with rename the files with Extension.auto... I think the Extension.auto.Driveletters.xml is the problem. Rename it to .disabled and start Ghost. If its a solution, rename it on the source and new test with new build with 'run default'

I'm happy you give me response, then I will correct it on my sorcedir.

best regards
2aCD

[Max Gilb]

Hi and thank you!

With your hints everything works fine now, even with fixed drive letters on the host system. As you suspected, Extension.auto.Driveletters.xml did the reassignment of drive letters to those, which were used in the host system - and that only, if they were fixed there. I doubt, that you need to change your script, because some people may be happy with the reassigning of Win7PE drive letters to the original host letters. As long as the booting CD-ROM ist not involved, everythings works as it should work.
For people like me, who have their cd-drive letters fixed, your hint to disable the Extension.auto.Driveletters.xml by renaming it, will be sufficient.

Best regards

Max Gilb

[2aCD]

Hi everyone,

I have upload the version v2 with an added option for 'assign driveletters'.
Now you can enabled or disabled this feature on the gui. The programsource is the same as v1 with enabled reassign driveletters.

best regards
2aCD

[n0d3]

Any thoughts on these two errors?

Edited by n0d3, 16 March 2011 - 05:40 PM.

[2aCD]

Hi,
do you have select the language in script as the same on your source?

Best regards
2acd

[n0d3]

Hi,
do you have select the language in script as the same on your source?

Best regards
2acd

Yes i do. Both are english, has an english build been tested?

[2aCD]

Yes I have test with Win7-Enterprise-x86-Source (x64 will not work).
On Root from Volume X must be SymInfo.xml with follow lines:

<SreInfo>
<pcAThinHostVersion>12.1</pcAThinHostVersion>
<StartNetwork>false</StartNetwork>
<StartPCAnywhere>false</StartPCAnywhere>
</SreInfo>

No language-infos are included. It's importend.
Do you down my modified symantec-source?

best regards
2acd

[n0d3]

Yes I have test with Win7-Enterprise-x86-Source (x64 will not work).
On Root from Volume X must be SymInfo.xml with follow lines:

<SreInfo>
<pcAThinHostVersion>12.1</pcAThinHostVersion>
<StartNetwork>false</StartNetwork>
<StartPCAnywhere>false</StartPCAnywhere>
</SreInfo>

No language-infos are included. It's importend.
Do you down my modified symantec-source?

best regards
2acd

my source is win 7 ultimate that file is there with those lines. i used your source files

[2aCD]

Can you use this line in x:\syminfo.xml for test:

<SreInfo>
<Languages>
<Default>en</Default>
<Id>en</Id>
</Languages>
<pcAThinHostVersion>12.1</pcAThinHostVersion>
<StartNetwork>false</StartNetwork>
<StartPCAnywhere>false</StartPCAnywhere>
</SreInfo>

Have anyone the same problems with english source?

Best regards
2aCD

[n0d3]

i have added those lines while in the PE environmetn. no luck there.
I am going to try rebuilding it with a windows 7 enterprise source. and see how well that goes.
i will also try disableing all other apps to be sure nothing is interfing

[n0d3]

I managed to make it work by disabling all apps and tweaks. i will try to locate the one that interfered.

[2aCD]

I'm curious, whats the problem

[boxer]

I don't seem to be able to download the "required folder with programfiles" the link: NortonGhost 15 SRD-ProgramFolder = "http://www3.biguploa...oad=4PBNTUPP0P" from the original post comes up with "Could not select" Maybe just post a folder tree, thanks!

[2aCD]

@boxer
download now working

best regards
2acd

[vigipirate]

hello

error restauring image ghost HIR 99%

[n0d3]

I have narrow the problem down to being a Vista PE app.. All Win7 PE apps are compatible.

[2aCD]

Hi n0d3

I have narrow the problem down to being a Vista PE app.. All Win7 PE apps are compatible.

And what are you doing on this app-script?

[n0d3]

Hi n0d3



And what are you doing on this app-script?

My source is windows 7 ultimate with the following settings.

[joja]

i cannot download the second file

[2aCD]

I have correct the upload now

best regards
2aCD

[doublesvsoop]

Someone may use G4L Ghost for Linux free alternative

http://sourceforge.net/projects/g4l/