Intel Rapid Storage driver and Win 7 PE
Posted 10 December 2010 - 08:03 PM
Has anyone tried to integrate the Intel Rapid Storage driver V188.8.131.524 with WinPE 3.0 or wimb's portable Win7? All my attempts to boot an .iso with this driver ( using grub4dos ) failed. The system hangs in the screen Starting Windows. Test computer is an Asus N53J. No any problem with a NativeEx disc built with the driver V9.6
Posted 10 December 2010 - 08:08 PM
Posted 10 December 2010 - 08:12 PM
The system is setup to run in SATA AHCI Mode. No any RAID configuration.
Posted 10 December 2010 - 11:01 PM
So don't bother with it - not worse the effort in your case. SATA driver for your chipset is all you need.
Posted 11 December 2010 - 05:41 PM
I guess you din't read correctly my postings. I am already using a SATA driver in my Win PE 3.0 build :
[codebox]Dism /image:C:\mnt /Add-Driver /driver:C:\iaStor2010 /recurse[/codebox] Can you tell me please how can I uninstall or deactive the service if WinPE 3.0 is unbootable? ( A small note : there is no services panel in PE 3.0 ) The mass storage driver is an essential element here.
Is there a solution apart from switching to IDE mode in BIOS settings?
Posted 12 December 2010 - 12:27 AM
If similar problem occurs with a regular Win install, this example of how to uninstall a "fantom" driver will help. Read also IRS Readme file for uninstall instructions.
Intel provides SATA drivers for its chipsets on Floppies too, or you can get them by unpacking the IRS installer in 7zip or such. Hence, SATA driver is also installed as part of IRS package. The package itself is mostly intended to manage RAID volumes. If you fully uninstall it, SATA driver gets uninstalled too. Then just add it as usual again.
In IDE mode IRS will continue endless search for SATA drives, thus raising your CPU usage quite a bit. If you can't boot PE in SATA mode regardless of IRS presence, the cause of your problem may be different.
Posted 13 December 2010 - 02:45 PM
WinPE 3.0 Storage Driver Issues
Switching to the IDE mode and starting with an untouched copy of WinPE 3.0 didn't solve the problem. Including \ excluding the iaStor driver both in AHCI \ IDE modes leads to the same result, an unbootable Win PE image. The most interesting is that all everything is fine with PE 1.x builds.
Posted 13 December 2010 - 04:50 PM
Can you try drvload command to install the SATA driver after booting to WinPE 3.0? Look f.e. through this thread for details. Also, wimb described various methods to install extra drivers to WinPE, f.e. look here for some ideas.
Did you try using WinBuilder?
Posted 13 December 2010 - 05:59 PM
I appreciate all your efforts to help me but I am afraid you didn't read correctly my postings :
All my attempts to boot an .iso with this driver ( using grub4dos ) failed. The system hangs in the screen Starting Windows
Switching to the IDE mode and starting with an untouched copy of WinPE 3.0 didn't solve the problem. Including \ excluding the iaStor driver both in AHCI \ IDE modes leads to the same result, an unbootable Win PE image.
You are asking me to try drvload, it's nice solution, I know it but how can I run this tool if cannot boot WinPE? I cannot get the console of PE 3.0 as it hangs during booting.
Posted 13 December 2010 - 06:21 PM
On the other hand, if you can't boot "untouched" (assuming, it means without Sata driver installed) WinPE in IDE mode, do you still think, Sata driver is at fault?
Posted 14 December 2010 - 06:50 PM
Posted 14 December 2010 - 08:28 PM
I found direct mapping doesn't always work that well as find --set root. So, your detail info may help fixing some apparent bugs (if any).
Posted 14 December 2010 - 08:45 PM
Here is my grub4dos entry :
[codebox]title Windows 7 PE map --mem (hd0,0)/7PE_x86+IE8.iso (hd32) map --hook chainloader (hd32)[/codebox] hd0,0 is a primary partition marked as active. This entry above worked fine in another computer with SATA mode set to IDE in BIOS.
Posted 15 December 2010 - 08:19 AM
Edited by Vortex, 15 December 2010 - 08:19 AM.
0 user(s) are reading this topic
0 members, 0 guests, 0 anonymous users