Jump to content











Photo
- - - - -

NaughtyPE and errors


  • Please log in to reply
42 replies to this topic

#1 Iamwithin

Iamwithin

    Member

  • Members
  • 59 posts
  •  
    United States

Posted 15 January 2010 - 06:35 PM

Hello,

After successfully making a VistaPE boot disk, I tried to make a NaughtyPE disk, but I am having problems. I use WinBuilder 078 SP3 and WindowsXP and Windows AIK. I use the "Recommended" build. The entire project assembles but I get these three errors:

(Word Pad) Expand - Failed to copy [C:\WinXP\i386\msftedit.dl_] to: [%BaseDir%\Target\NaughtyPE\i386\system32\msftedit.dl_]: The system cannot find the file specified.

(USB Mass Storage Devices) Expand - Failed to copy [C:\WinXP\i386\usbehci.sy_] to: [%BaseDir%\Target\NaughtyPE\i386\system32\drivers\usbehci.sy_]: The system cannot find the file specified.

(XPE - pnp multimedia) Expand - Failed to copy [C:\WinXP\i386\sdhcinst.dl_] to: [%BaseDir%\Target\NaughtyPE\I386\system32\sdhcinst.dl_]: The system cannot find the file specified.

After the .iso file is burned to CD (I use Nero ROM) when I try to boot I get this error:

The entry "ntkrnlmp.exe" in the [SourceDisksFiles] section of the INF file is corrupt or missing. Setup cannot continue.

Any help would be appreciated.

Bill

#2 MedEvil

MedEvil

    Platinum Member

  • .script developer
  • 7,761 posts

Posted 15 January 2010 - 07:45 PM

Please try to build NaughtyPE again with eighter WB077RC2 or WB078SP6.
WB077RC2 is thoroughly tested to work without problem. WB078SP6 is in testing stages and has so far not shown any big problems.
Versions inbetween are not tested and unsupported!

:confused1:

#3 Iamwithin

Iamwithin

    Member

  • Members
  • 59 posts
  •  
    United States

Posted 15 January 2010 - 08:05 PM

I'll try it right now, thanks. :confused1:

#4 Iamwithin

Iamwithin

    Member

  • Members
  • 59 posts
  •  
    United States

Posted 16 January 2010 - 12:28 AM

After trying WinBuilder 078 SP 6 the three errors above changed to these 3:

(Explorer.Script) CopyOrExpand - Failed to copy [C:\WinXP\I386\XPSP2RES.dl_] to: [%BaseDir%\Target\NaughtyPE\I386\System32\XPSP2res.dll]: The system cannot find the file specified.

(api.script) CopyOrExpand - Failed to copy [C:\WinXP\I386\wshbth.dl_] to: [%BaseDir%\Target\NaughtyPE\I386\System32\wshbth.dll]: The system cannot find the file specified.

(XPE - pnp multimedia) Expand - Failed to copy [C:\WinXP\i386\sdhcinst.dl_] to: [%BaseDir%\Target\NaughtyPE\I386\system32\sdhcinst.dl_]: The system cannot find the file specified.

And when I boot the CD I get the Blue Screen of Death.

I have not located a copy of the file WB077RC2 to try that version.

#5 MedEvil

MedEvil

    Platinum Member

  • .script developer
  • 7,761 posts

Posted 16 January 2010 - 01:11 AM

No need to look for the older version. You should have gotten a working build without (reported) errors with WB078SP6.

Please zip the log file and post it here, so that i can have a look what is going on.

Upfront a few things to check.
Do those files exist in your source CD?
Do you use by chance a OEM CD of XP as source?
Is the file system of the drive you run NaughtyPE from anything but NTFS?
Did you make any changes in the Basic folder?
Select the download tab to check, if you might not got all needed files. (The server has some troubles at the moment.)


:confused1:

#6 Iamwithin

Iamwithin

    Member

  • Members
  • 59 posts
  •  
    United States

Posted 16 January 2010 - 04:00 AM

Wow MedEvil, don't you ever go to bed? Oh wait, maybe you've been married as long as I have. :confused1:

Okay, I found the solution. Everything working. Here is what the problem was...

I used 4 different Windows XP CD's and everyone it turned out was SP1.
I found my archive for SP2 and unzipped it into the WindowsXP i386 folder and the files
were now there for WinBuilder to find. Voila! No errors and all is well.
I tested on an XP machine and it boote great.
But on a Vista machine it bombs with blue screen.

I'm guessing these boot CD's only work with same OS unless under VMWare.

I don't know how to send thank you, but I am grateful for your time and effort.

THANKS!!

#7 MedEvil

MedEvil

    Platinum Member

  • .script developer
  • 7,761 posts

Posted 16 January 2010 - 11:58 AM

Wow MedEvil, don't you ever go to bed? Oh wait, maybe you've been married as long as I have. :rolleyes:

Bed? Is that that flat thing with the fluffy pillows? :cheers:

Okay, I found the solution. Everything working.

Great! 1 Problem down.

I tested on an XP machine and it boote great.
But on a Vista machine it bombs with blue screen.

I'm guessing these boot CD's only work with same OS unless under VMWare.

A PE doesn't care about the OS that usually runs on the machine. Just the hardware.
Do i assume right that with a Vista machine you mean a newer computer?

I assume that your CD/DVD drive is a SATA one and NaughtyPE misses the right driver for it.
If you tell me, what the blue screen says and what kind of controller your Vista machine uses, i'm sure we can get it to work on that machine too.

I don't know how to send thank you, but I am grateful for your time and effort.

THANKS!!

You're very welcome. :confused1:

#8 MedEvil

MedEvil

    Platinum Member

  • .script developer
  • 7,761 posts

Posted 16 January 2010 - 02:44 PM

Hey, got an easy way for you to check, if it is really a driver problem.
When booting NaughtyPE on your Vista machine, go into the BIOS and select 'IDE modus' or 'PATA modus' or whatever it may be called in the BIOS. If NaughtyPE then boots fine, the problem is the Sata controller driver.

:confused1:

#9 Iamwithin

Iamwithin

    Member

  • Members
  • 59 posts
  •  
    United States

Posted 16 January 2010 - 04:47 PM

Morning! :confused1:

Old machine from 2002.

New machine last year - Quad core.

Drives default are Sata - RAID

changed BIOS to IDE, same blue screen after WindowsXP starts to load.

Message is - STOP: 0X0000007B (0XF78AE528, 0XC0000034, 0X00000000, 0X00000000)

Bill

#10 MedEvil

MedEvil

    Platinum Member

  • .script developer
  • 7,761 posts

Posted 16 January 2010 - 05:33 PM

That's odd, i have a brand new Quadcore myself and NaughtyPE runs fine in IDE and SATA mode.

You can try to turn off AHCI.

But i'm pretty sure the problem can be solved by putting the needed driver in NaughtyPE.
For that, you will have to give me some info or you could try using LiveXP\Drivers\4.Storage\DP's-Build_MassStorageDrivers scripts (both) from the LiveXP server.
It is more uptodate and might contain the needed driver.


:confused1:

#11 Iamwithin

Iamwithin

    Member

  • Members
  • 59 posts
  •  
    United States

Posted 16 January 2010 - 05:40 PM

you will have to give me some info...

I have the cab files on my computer here is what three of them say:

File Description: Intel SATA Raid Driver 32-bit
Version: 7.5.0.1017
Operating System: Microsoft® Windows® Vista
Part Number: D20155-001-001
….........................................
File Description: Intel SATA RAID Driver - Vista 32-bit/64-bit
Version: 7.8.0.1012
Operating System: Microsoft® Windows Vista® 32-bit/64-bit
Part Number: D20283-001-002

…........................................
The Intel® Management Engine Interface
(Intel® ME Interface) is the interface
between the Intel® Management Engine
firmware and the host. Drivers and
applications on the host that wish to
interact with Intel® Management Engine
through host interface would use the
Intel® ME Interface host windows
driver.

What info do you need?

#12 MedEvil

MedEvil

    Platinum Member

  • .script developer
  • 7,761 posts

Posted 16 January 2010 - 06:05 PM

I would need the name of the controllerchip. It should start with >Intel<. :rolleyes:
If this info is not in the manual for your mainboard, you should also find it in the device manager.


:confused1:

#13 Iamwithin

Iamwithin

    Member

  • Members
  • 59 posts
  •  
    United States

Posted 16 January 2010 - 06:20 PM

Controllers

Intel® ICH8R/ICH9R SATA RAID Controller

ITE IT8211 ATA/ATAPI Controller

Microsoft iSCSI Initiator

#14 Iamwithin

Iamwithin

    Member

  • Members
  • 59 posts
  •  
    United States

Posted 16 January 2010 - 06:26 PM

system devices:

Intel® 82801 PCI Bridge - 244E
Intel® G33/G31/P35 Express Chipset PCI Express Root Port - 29C1
Intel® G33/G31/P35 Express Chipset Processor to I/O Controller - 29C0
Intel® ICH9 Family PCI Express Root Port 1 - 2940
Intel® ICH9 Family PCI Express Root Port 2 - 2942
Intel® ICH9 Family PCI Express Root Port 3 - 2944
Intel® ICH9 Family PCI Express Root Port 4 - 2946
Intel® ICH9 Family PCI Express Root Port 5 - 2948
Intel® ICH9 Family SMBus Controller - 2930
Intel® ICH9R LPC Interface Controller - 2916
Intel® Management Engine Interface

#15 MedEvil

MedEvil

    Platinum Member

  • .script developer
  • 7,761 posts

Posted 16 January 2010 - 08:00 PM

The Intel ICH8R driver is already in the SATA script.
Will look for a ICH9R one and post back.

:confused1:

#16 MedEvil

MedEvil

    Platinum Member

  • .script developer
  • 7,761 posts

Posted 16 January 2010 - 09:43 PM

Have thrown a script together for testing.
It goes into NaugtyPE drivers and should automaticly turn the SATA script off. If not, do it yourself.
http://naughtype.win...l_Sata_Test.rar


:confused1:

#17 Iamwithin

Iamwithin

    Member

  • Members
  • 59 posts
  •  
    United States

Posted 16 January 2010 - 11:01 PM

Have thrown a script together for testing.
It goes into NaugtyPE drivers and should automaticly turn the SATA script off. If not, do it yourself.
http://naughtype.win...l_Sata_Test.rar


:confused1:


The link doesn't work from my end.
I would do it myself, but do not know how to turn it off.

But I have taken too much of your time.
Good night now.

#18 MedEvil

MedEvil

    Platinum Member

  • .script developer
  • 7,761 posts

Posted 17 January 2010 - 12:30 AM

Checked the link again. It works fine.

What to do with the file:
- inside the archive is a script, copy it to YourWinBuilderFolder\Projects\NaughtyPE\Drivers
- start WinBuilder
- check in NaughtyPE\Drivers if the Sata script has no checkmark, if it has, uncheck it
- make a fresh build
- let me know how things worked out :rolleyes:

:confused1:

#19 Iamwithin

Iamwithin

    Member

  • Members
  • 59 posts
  •  
    United States

Posted 17 January 2010 - 12:34 AM

I'm sorry, not trying to be difficult.
I get this when click on link:

Address Not Found

Firefox can't find the server at naughtype.winbuilder.net


any other place I can download from?

#20 Lancelot

Lancelot

    Frequent Member

  • .script developer
  • 5,013 posts
  • Location:Turkiye/Izmir
  • Interests:*Mechanical stuff and Physics,
    *LiveXP, BartPE, SherpyaXPE,
    *Basketball and Looong Walking,
    *Buying outwear for my girlf (Reason: Girls are stupid about buying bad stuff to make themselves uglier :))
    *Girls (Lyric: Girl,...., You will be a womann, Soon)
    *Answering questions for "Meaning of life",
    *Helping people,

    Kung with LiveXP, Fu with Peter :)
  •  
    Turkey

Posted 17 January 2010 - 12:51 AM

link works here with ff,
anyway, I hope this helps: http://www.2shared.c..._Sata_Test.html

#21 Iamwithin

Iamwithin

    Member

  • Members
  • 59 posts
  •  
    United States

Posted 17 January 2010 - 12:58 AM

Got it! Thanks Lancelot.

Just finished build with Sata unchecked.
Testing now.

#22 Iamwithin

Iamwithin

    Member

  • Members
  • 59 posts
  •  
    United States

Posted 17 January 2010 - 01:39 AM

Okay so I did the following:

- inside the archive is a script, copy it to YourWinBuilderFolder\Projects\NaughtyPE\Drivers
- start WinBuilder
- check in NaughtyPE\Drivers if the Sata script has no checkmark, if it has, uncheck it
- make a fresh build

Results were the same. WinBuilder reports no errors,
iso burns to CD. Boot up results in everything okay until WindowsXP screen.
Bar goes across at bottom 4 times then blue screen of death.

#23 MedEvil

MedEvil

    Platinum Member

  • .script developer
  • 7,761 posts

Posted 17 January 2010 - 02:26 AM

Sorry, i'm a bit clueless at the moment.
So late in the boot process that has to be something else but the SATA driver, imo. But what? :confused1:

Maybe you can give Lancelots LiveXP a spin.
Na matter what the result is, two independant PE should help us narrow down, what goes wrong.


:rolleyes:

PS: Thanks Lancelot for the help! :rolleyes:

#24 Lancelot

Lancelot

    Frequent Member

  • .script developer
  • 5,013 posts
  • Location:Turkiye/Izmir
  • Interests:*Mechanical stuff and Physics,
    *LiveXP, BartPE, SherpyaXPE,
    *Basketball and Looong Walking,
    *Buying outwear for my girlf (Reason: Girls are stupid about buying bad stuff to make themselves uglier :))
    *Girls (Lyric: Girl,...., You will be a womann, Soon)
    *Answering questions for "Meaning of life",
    *Helping people,

    Kung with LiveXP, Fu with Peter :)
  •  
    Turkey

Posted 17 January 2010 - 02:32 AM

Hi MedEvil

just a correction, it is not my livexp.


Hi Iamwithin,

since MedEvil asked for a quick test, follow this:
download the package from here http://winbuilder.ne...oad.php?view.35
extract to an empty folder and make the build as usual
and make a test boot to see how it works on the pc you get bsod.

I give no promise, whatever the result, it will help both livexp and naughtype :confused1:

:rolleyes:

edit: minor adding to clarify

#25 Iamwithin

Iamwithin

    Member

  • Members
  • 59 posts
  •  
    United States

Posted 17 January 2010 - 02:49 AM

Hi MedEvil

just a correction, it is not my livexp.


Hi Iamwithin,

since MedEvil asked for a quick test, follow this:
download the package from here http://winbuilder.ne...oad.php?view.35


with FF I get
Address Not Found
Firefox can't find the server

with IE I get
Internet Explorer cannot display the webpage

will have to try in the morning

thanks both of you, I appreciate it,




0 user(s) are reading this topic

0 members, 0 guests, 0 anonymous users