VistaPE network

Posted 06 January 2007 - 01:59 AM

• Back to top

Posted 07 January 2007 - 12:38 PM

Some quote from MSFN forum:,,,,,,,,,,,,,,,,,

Few days ago, I got staticIP in my VistaPE searching in web days and nights.
You will find them in Vista Library in netsh usage page.
For convenience, I'll show most useful command lines here.
netsh interface ip set address name="Local Area Connection" static 192.168.0.100 255.255.255.0 192.168.0.1 1
netsh interface ip set address "Local Area Connection" dhcp [ for Dynamic ip]
netsh interface ip set dns "Local Area Connection" static 192.168.0.200
netsh interface ip set dns "Local Area Connection" dhcp [for Dynamic dns]
netsh interface ip set wins "Local Area Connection" static 192.168.0.200
netsh -c interface dump > c:\location1.txt [Export DHCP to c:\ location]
netsh -f c:\location1.txt [Import from c:\test file into DHCP]
You can change your network name what you want.
Consider one sentense in each command line and substitute with your IP adress and subnet mask and DNS address. Please see details in V_Library"wired LAN" page.
http://technet2.micr...3.mspx?mfr=true

Regards.

But I can't filesharing from my VistaPE YET. Others from my network can't assess to VistaPE even can't ping to the host. [loss 100%]

Regards

• Back to top

Posted 07 January 2007 - 01:25 PM

• Back to top

Posted 08 January 2007 - 09:29 AM

yahoouk
try wpeutil DisableFirewall

Thanks for your advice.
No way, already tried before.
Problem is Server service(Lanmanserver service) not started,
I can't start it yet, but trying to find solution.
Ping from others is OK now, [0% loss]

regards

yahoouk

• Back to top

Posted 09 January 2007 - 12:39 PM

Hi, NightMan and yahoouk.^^

I don`t know the network well, and can`t help you.^^;

yahoouk, good luck.

• Back to top

Posted 09 January 2007 - 03:48 PM

Hi NightMan,

browser service is needed to run. lanmanserver service depends on it.
browstat can't start in Vista. Do you have any idea?
nbtstat status is unable too.

regards

• Back to top

Posted 10 January 2007 - 01:55 PM

• Back to top

Posted 12 January 2007 - 09:40 AM

• Back to top

Posted 12 January 2007 - 05:32 PM

• Back to top

Posted 13 January 2007 - 12:12 PM

Hi 'NightMan'

Thanks for your reply, yes, they are HP computers.
The error is related to I/O addresses.
Nexe week, I'll copy that error and post here.
Boot time is very very slow.
On DELL PCs, it is OK, but quite slow as well.

By the way, ftp server doesn't work because of browser service.
NetBiosTable shows Computer name and WORKGROUP is already regisgered but MS Browser doesn't appear at all.
Checking Services, Lanmanserver does not start.
Checking Reg, Lanmanserver keys are correctly found.
Checking Modules on Lanmanserver, Browser service is dead.
Srv, Srv1, Srv2 all dlls are loaded.

When I run a HTTP Server on VPE, it is running, but can't browse any of it.
I think Browser service is depend on explorer.exe from Vista.
But I'm trying to find some clue in web.

Regards

• Back to top

Posted 02 February 2007 - 04:42 AM

• Back to top

Posted 07 February 2007 - 10:58 AM

• Back to top

Posted 11 February 2007 - 01:51 AM

• Back to top