Please someone recommend me good working mp tool, i tried many but none of them detecting my USB. i also tried editing alcormp.inf file but still no Luck...
here is my Usb Info...
Posted 05 July 2014 - 11:43 PM
Please someone recommend me good working mp tool, i tried many but none of them detecting my USB. i also tried editing alcormp.inf file but still no Luck...
here is my Usb Info...
Posted 06 July 2014 - 12:13 PM
Posted 06 July 2014 - 03:11 PM
Posted 06 July 2014 - 05:40 PM
"Team Robot" My Usb Become Write protected and the only way to remove that protection is to use MP Tool .. but i tried almost all MP tool(Alcor Micro) available on flashboot.ru and usbdev.ru but none of them detecting my usb .. so i need some help...
"Advance User " i already read this but it's not helpful, no Tool is detecting my usb... only two of them detecting but they gave me error which is "Get Chip flash Number fail"... So help Please...
Posted 06 July 2014 - 06:45 PM
"Team Robot" My Usb Become Write protected and the only way to remove that protection is to use MP Tool .. but i tried almost all MP tool(Alcor Micro) available on flashboot.ru and usbdev.ru but none of them detecting my usb .. so i need some help...
"Advance User " i already read this but it's not helpful, no Tool is detecting my usb... only two of them detecting but they gave me error which is "Get Chip flash Number fail"... So help Please...
Ok, you will need to RE-read it AGAIN.
Description: [L:]USB Mass Storage Device(Kingston DataTraveler G3)Device Type: Mass Storage DeviceProtocal Version: USB 2.00Current Speed: High SpeedMax Current: 100mAUSB Device ID: VID = 0951 PID = 1624
An Alcor tool won't detect an USB with that PID/VID.
Wonko
Posted 06 July 2014 - 07:00 PM
Are you sure the flash is not FAKE and it worked at real capacity?
For future reference, this same thread may be read here: http://www.usbdev.ru...p-please/#p2321
EDIT: This must worth reading, it seems the same problem (?): http://www.911cd.net...opic=25295&st=0
Posted 06 July 2014 - 07:07 PM
I change the vid/pid but still USB is undetectable...
Flash works fine before write protection, and i think it's not fake , because last time i copied 4Gb data on it and it copies Successfully..
Posted 07 July 2014 - 07:04 AM
Well, until you will post HOW EXACTLY you "changed" the vid/pid, which EXACT tools did you try using, under which EXACT OS you did the tests, etc., etc., compare with:
http://homepage.ntlw...ard-litany.html
it is very improbable that you can get any form of help/assistance.
Of course you can insist on whining providing only vague info or no info, but it won't help in getting you further into the (hopefully successful) repair attempt.
In any case the good guy at www.usbdev.ru is the one with the most experience and knowledge on these tools , so it is improbable that you will get here "better" advice than what you can get from there.
Just so you know there are seemingly two kinds of "fakes":
Wonko
0 members, 0 guests, 0 anonymous users