MultiPE Leopard v2 - Developments
#1
Posted 17 November 2010 - 07:33 PM
#3
Posted 20 November 2010 - 03:46 PM
#4
Posted 20 November 2010 - 09:13 PM
i have the script of "hiren's bootcd" update and I care that he can handle all versions (tested on version from 9.6 to 12.0)
Only I can not upload to mediafire (can not load the upload tool)
So you'll get one soon, once it becomes available
Best regards
Edited by ajterpstra, 20 November 2010 - 09:15 PM.
#5
Posted 20 November 2010 - 11:56 PM
hey Max_Real Qnx,
i have the script of "hiren's bootcd" update and I care that he can handle all versions (tested on version from 9.6 to 12.0)
Only I can not upload to mediafire (can not load the upload tool)
So you'll get one soon, once it becomes available
Best regards
Hi ajterpstra
This is good news. If you want share your e-mail address with me, i can send the DropBox invitation to you. My e-mail address: QnxMaxQnx@netscape.net Best regards
#6
Posted 21 November 2010 - 10:00 AM
Hi ajterpstra
This is good news. If you want share your e-mail address with me, i can send the DropBox invitation to you. My e-mail address: QnxMaxQnx@netscape.net Best regards
hey,
The email has been sent to your email address
#7
Posted 21 November 2010 - 01:50 PM
7-zip 9.20
Should only be tested, but i am doing that
#8
Posted 21 November 2010 - 02:33 PM
Awesome. I'll test it tonight on VMware.
I've tried the Acronis script. Acronis Disk Director worked perfectly. Acronis True Image didn't worked. I'll try again to rebuild it.
#9
Posted 21 November 2010 - 09:43 PM
I've tried the Acronis script. Acronis Disk Director worked perfectly. Acronis True Image didn't worked. I'll try again to rebuild it.
Hi Yav
I'm thank you for your valuable feedback. Until the end of this week I will test it. Because i do not have too much free time.
Hi ajterpstra
I'm thank you ajterpstra for your tips and scripts. Best regards my friends
Coming soon :
Windows_VistaPE_2010_11_21_23_37_39.png 178.4KB 44 downloads
#10
Posted 22 November 2010 - 10:21 AM
Hi Yav
I'm thank you for your valuable feedback. Until the end of this week I will test it. Because i do not have too much free time.
Hi ajterpstra
I'm thank you ajterpstra for your tips and scripts. Best regards my friends
Coming soon :
Windows_VistaPE_2010_11_21_23_37_39.png 178.4KB 44 downloads
Hi,
Your welcome, i have lot of file's of the project VIstaPE (The create's, C'T magazine, and other Resources) i will make a screenshot of VistaPE what I got from there, And will the file's upgrade to the new generation. There are about ± 50 programs and it just fits on a USB 1 GB. one of them is the live CD of "Acronis TrueImage Home 11 rescue CD"
Edited by ajterpstra, 22 November 2010 - 10:22 AM.
#11
Posted 23 November 2010 - 01:45 PM
i want telnet client in MPL.
But How to do it? It is package inside Widows.
Thanks
#12
Posted 23 November 2010 - 09:17 PM
Hi Max,
i want telnet client in MPL.
But How to do it? It is package inside Widows.
Thanks
Hi my friend
If i can find an empty time, i will examine the subject. If any person help me on this subject, we can solve the subject faster. Best regards
#13
Posted 24 November 2010 - 07:23 PM
Hi Max,
i want telnet client in MPL.
But How to do it? It is package inside Widows.
Thanks
Hallo,
If you want you can use the programma "PUTTY", I have already such a script for a project, but the only test when working with this project.
But if you want I can make a script for the thing you want. I've done a little research and this is not much more to make it. but I have time for this weekend to make it
Best regards
#14
Posted 24 November 2010 - 07:47 PM
Hallo,
If you want you can use the programma "PUTTY", I have already such a script for a project, but the only test when working with this project.
But if you want I can make a script for the thing you want. I've done a little research and this is not much more to make it. but I have time for this weekend to make it
Best regards
Hi,
i know about putty but i use telnet for testing ports.
WOW i am looking forward on your script. I did little research as well but i didn't find any clue how to do it.
Thank you very much
#15
Posted 27 November 2010 - 02:30 PM
Hi,
i know about putty but i use telnet for testing ports.
WOW i am looking forward on your script. I did little research as well but i didn't find any clue how to do it.
Thank you very much
hi Filip Hasa,
i have make the scrip but i testing it now.
but when he is done, and he is good. I'll put it on the internet and you can also use it
Best regards
Edited by ajterpstra, 27 November 2010 - 02:30 PM.
#16
Posted 27 November 2010 - 08:39 PM
hi Filip Hasa,
i have make the scrip but i testing it now.
but when he is done, and he is good. I'll put it on the internet and you can also use it
Best regards
to bad,
it already has failed, but I do not know why yet. else is it if the program "putty" use than
#17
Posted 29 November 2010 - 11:48 AM
to bad,
it already has failed, but I do not know why yet. else is it if the program "putty" use than
Hi,
i found your script on DropBox. I modified a little bit (for amd64) and upload to my dir.
DirCopy and FileCopy has horrible behavior ;o(
I am testing now.
Thank you
#18
Posted 29 November 2010 - 01:05 PM
Hi,
i found your script on DropBox. I modified a little bit (for amd64) and upload to my dir.
DirCopy and FileCopy has horrible behavior ;o(
I am testing now.
Thank you
Hi Filip Hasa,
I know it's very bad, but the problem is that it is not on the same location in Windows 7 DVD. so that only I had resolved in this way.
But thank you already have adapted it for the AMD64 version and that you are busy testing.
But I had no time to continue with the script for the weekend. between what came with anything and everything
#19
Posted 30 November 2010 - 03:11 PM
Hi Filip Hasa,
I know it's very bad, but the problem is that it is not on the same location in Windows 7 DVD. so that only I had resolved in this way.
But thank you already have adapted it for the AMD64 version and that you are busy testing.
But I had no time to continue with the script for the weekend. between what came with anything and everything
Interesting. Telnet is not working. Without any error or message "Connecting ..." Something missing.
#20
Posted 04 December 2010 - 03:25 PM
Interesting. Telnet is not working. Without any error or message "Connecting ..." Something missing.
ooh, i will check it. I had already suspected that something was missing
#21
Posted 10 January 2011 - 04:11 PM
i create script for SARDU tool. Place it to "Finalize" directory.
Any feedback is welcome.
Thanks
#22
Posted 14 January 2011 - 07:40 AM
have you seen this?
http://www.911cd.net...showtopic=24245
I am planing to create script for it. May be you will want to integrate it to vpeldr
Have a nice day
#23
Posted 14 January 2011 - 01:51 PM
Hi Max,
have you seen this?
http://www.911cd.net...showtopic=24245
I am planing to create script for it. May be you will want to integrate it to vpeldr
Have a nice day
This tools is bloody fast. I have to test on real env. It is much better/faster/clever than storagebootfix.cmd batch file. And it can find drivers in directory him self. Everything depends on real HWID!!!! and it has nice output.
I love it.
#24
Posted 22 January 2011 - 12:36 PM
Hi Max,
have you seen this?
http://www.911cd.net...showtopic=24245
I am planing to create script for it. May be you will want to integrate it to vpeldr
Have a nice day
Hi mate
I was sick for a week. That's why I have not worked on the project. Now I came back. We can continue from the last.
Do you agree to the vpeldr this way ? Best regards
22.01.png 34.49KB 42 downloads
Vpeldr RT.2 (22.01.2010)
http://rapidshare.co..._22.01.2011_.7z
mirror link: http://www.mediafire...c8hbxcdz92911mq
#25
Posted 22 January 2011 - 03:29 PM
This tools is bloody fast. I have to test on real env. It is much better/faster/clever than storagebootfix.cmd batch file. And it can find drivers in directory him self. Everything depends on real HWID!!!! and it has nice output.
I love it.
Hi mate
Yes it really fastest than storagebootfix.cmd but when this program is used with Standard-7-iso-usb-hdd.script, the blue screen error appears again. Best regards
0 user(s) are reading this topic
0 members, 0 guests, 0 anonymous users