No replies to this topic

[Paulr]

so far so good it hands out IP addresses.

However I need to specify several options for our mitel ip phones in hexadecimal format. I've tried several different mays of experessing the number in the options .ini file but on the phone it never comesup with the right VLAN number

AddOptionNumber5=132
AddOptionValue5=0x64
AddOptionNumber6=133
AddOptionValue6=0x06
AddOptionNumber7=134
AddOptionValue7=0x2e

option 132 needs to be the VLAN ID in Hexadecimal. on the phone when it boots it displays a vlan number that is 10 digits long. I have tried using an i before it i have tried padding with 0's I have tried putting it in reverse. no luck. the VLAN ID changes on the phone and its a different number whenever i make a change but they are always an 8-10 digit number

same thing with option 133 it is the voice priority which should be 6 in hexadecimal

option 134 is also a hexadecimal which should be 46 expressed in hexadecimal.