![Posted Image](http://i866.photobucket.com/albums/ab225/bukvod/fbinst.jpg)
Now I found it best to start from a previous built fba file archive. Open the file as shown here ( I tried to upload a starter file but I have to slow of a connection) You will need to right click and import image and gfxmenu into the ud area.
![Posted Image](http://i866.photobucket.com/albums/ab225/bukvod/fbinst1.jpg)
![Posted Image](http://i866.photobucket.com/albums/ab225/bukvod/fbinst2.jpg)
Now from the ud window by right clicking in the window you can delete, import and export files.
![Posted Image](http://i866.photobucket.com/albums/ab225/bukvod/fbinst6.jpg)
You will need to import your iso image here import to primary area.
Next you will need to modify the menu.lst. to do this select the Grldr menu button
you then can edit as you see fit. To save changes highlight entire text and right click and select save as ansi
as show here
![Posted Image](http://i866.photobucket.com/albums/ab225/bukvod/fbinst4.jpg)
You can also have a fb menu as well and edit and change it the same way but i simple dont need it and have it disabled with a timeout of 0. Anyway, you should now have your ISO image showing up in the ud primary area and have the Grldr menu as you need it to be next we will format the drive you are going to put this on. This may destroy all the data on the drive if the MBR area is being increased larger than it once was. KEEP YOUR DATA IN SAFE PLACE IF YOU WANT TO KEEP IT. YOU HAVE BEEN WARNED!!
Before we go any farther lets save everthing select data management then select backup all files to archive
So now with your drive plugged in under boot config select format options. Select your fba archive file. Now here is somewhat trial and error until find the correct size of the primary and extended areas. but your setup should look something like this
![Posted Image](http://i866.photobucket.com/albums/ab225/bukvod/fbinst5.jpg)
For the most part if something is not setup correctly it will fault and tell you what needs changed. once your format operation is complete you will need to select Boot Config then select BPB Management then select copy BPB to MBR
as shown
![Posted Image](http://i866.photobucket.com/albums/ab225/bukvod/fbinst7.jpg)
but when your done your entire build, menu etc.... everything will be in a hidden partition. You will now need to format your disk. from my computer right click and select format. once you have formated your drive you are finished the build has be placed in a hidden partition that only you know is there. As reported by disk management
![Posted Image](http://i866.photobucket.com/albums/ab225/bukvod/fbinst8.jpg)