Sure , everyone knows that a Mass Storage Driver for a Virtual device, BTW not fully integrated into NT, is EXACTLY the same as HID hardware device drivers.Is this possible?
Wonko
Posted 11 February 2010 - 03:46 PM
Sure , everyone knows that a Mass Storage Driver for a Virtual device, BTW not fully integrated into NT, is EXACTLY the same as HID hardware device drivers.Is this possible?
Posted 11 February 2010 - 04:26 PM
Very nice choice Thanks for pointing (& reminding)The VDK is no longer availing the project, today I'll be uploading the new package
VDK was replaced by this: http://www.nu2.nu/bfi/
Posted 11 February 2010 - 05:02 PM
Posted 11 February 2010 - 05:08 PM
JFYI:Very nice choice Thanks for pointing (& reminding)
Posted 11 February 2010 - 08:17 PM
If they are 64bit drivers. If 32bit, they will not ever work under 64bit OS.So would it be possible to use XP WHQL drivers also in Win7, with the above mentioned fixes?
Read here for a start: http://www.mydigital...ment-overrider/And where can i turn off the enforced driver signing?
You will need to have it constantly disable, as far as I'm aware. You can manually press F8 at boot every time you want it disabled. Or use one of the utils in the above thread.Also, would i need to keep enforced driver signing disabled also after the install or is during the install good enough?
Posted 11 February 2010 - 08:38 PM
Posted 11 February 2010 - 08:48 PM
Thanks a lot BeatZero,
now I successfully made my first build that boots fine with vmware emulator using with the script you provided
yippiiee, back to win98 days.
Posted 11 February 2010 - 10:59 PM
as I wrote on other topic, I do not have dvdrw or cdrw for a while. I tried ufd-chip-isoadding trick (which took time) but did not work (well no surprise, it is not a perfect trick ).Pls. Burn this image on CDRW and test directly on your computer(s)
Posted 13 February 2010 - 06:22 AM
Posted 13 February 2010 - 06:30 AM
fixes for this problem are available in the new package -> http://win98livecd.winbuilder.net 14/02/2010Hello guys,
i'm still getting errors, please see the log file attached
Posted 20 February 2010 - 05:39 PM
fixes for this problem are available in the new package -> http://win98livecd.winbuilder.net 14/02/2010
Posted 20 February 2010 - 06:38 PM
Hello TokenerThanks a lot BeatZero for the new package.
I like the Project because its small and NTFS-reading.
But I had some problems:
I built an ISO with -BASIC, -DRIVERS, -FINISH Elements, using German WIN98-CD.
When booting in VirtualBox 1.5.6 (Last Innotek-Version),
I get a message while "Setting up Hardware"-Section telling me to insert win98-CD.
I insert the WIN98-CD into VM and the boot-process is running well...
To avoid inserting Extra WIN98-CD I include the missing "BASE5.CAB" into the Win98LiveCD-Folder WIN98 and rebuild the ISO.
By testing I checked that "BASE5.CAB" is the only extra-file responsable for successful booting.
But although the "BASE5.CAB" is present, the boot-process fails, leaving an errrormessage.
Maybe anyone has the same experience and found a way to solve the issue.
- will english CD fix it ?
- I´ll try and get one anyway.
Solong T.
Posted 21 February 2010 - 12:46 PM
Hello Tokener
Try to write to CDRW and run directly on your computer(s)
BeatZero
Posted 21 February 2010 - 09:31 PM
Posted 22 February 2010 - 03:06 AM
I finished the test now and it worked, just as the version 078_SP#.Great Project. Will it work with Winbuilder 080?
Posted 22 February 2010 - 04:53 AM
Posted 20 March 2010 - 08:29 PM
Posted 07 May 2010 - 09:12 PM
Posted 07 May 2010 - 11:09 PM
Two posts above yours there is an actual report that it works BOTH with 078_SP# AND 080.I have tried building W98 LiveCd using WB075Beta5 on windows 98SE with no sucess.
Posted 20 May 2010 - 06:06 PM
Posted 06 June 2010 - 08:59 PM
Posted 07 June 2010 - 06:11 PM
Using grub4dos, it would be interesting to boot Win98LiveCD.iso located in the hard disc. Is there a way to do it?
AUTOEXEC.BAT INSIDE WIN98.IMG:color white/blue green/blue
timeout 0
default 0
title Mini Windows 98
find --set-root /Win98/WIN98.IMG
map --mem /Win98/WIN98.IMG (fd0)
map --hook
chainloader (fd0)+1
rootnoverify (fd0)
map --floppies=2
CONFIG.SYS INSIDE WIN98.IMG:A:\DOS\xmsdsk 48000 X: /t /y /c2
A:\DOS\DOSlfn
A:\DOS\shsucdx /d:oemCD001 /L:Y
copy start.bat X:\
A:\dos\7za.exe x A:\WIN98\Windows.7z -oX:
set comspec=X:\WINDOWS\command.com
device=A:\DOS\XCDROM.SYS /D:oemCD001
DEVICE=A:\DOS\HIMEMX.EXE /testmem:off
DEVICE=A:\DOS\ifshlp.sys
DEVICE=A:\DOS\dblbuff.sys
mode con codepage prepare=((850) X:\WINDOWS\COMMAND\ega.cpi)
mode con codepage select=850
keyb br,,X:\WINDOWS\COMMAND\keybrd.sys
DEVICE=x:\WINDOWS\setver.exe
device=x:\WINDOWS\COMMAND\display.sys con=(ega,,1)
Country=055,850,x:\WINDOWS\COMMAND\country.sys
DEVICE=x:\WINDOWS\HIMEM.SYS
DEVICE=x:\WINDOWS\emm386.exe noems
DEVICE=x:\WINDOWS\ifshlp.sys
DEVICE=x:\WINDOWS\dblbuff.sys
Posted 08 June 2010 - 05:53 PM
0 members, 0 guests, 0 anonymous users