Dear All,
I succeeded in ipxe booting of iscsi target of windows 7, 8, 10. But During the load, windows logo stage takes more time to load and after it boots fine.
This is the script i am using from reboot.pro
#!ipxe
dhcp net0
set initiator-iqn iqn.1991-05.com.microsoft:murugaa-murugaa-target
set root-path iscsi:192.168.1.16::::iqn.1991-05.com.microsoft:murugaa-murugaa-target
set keep-san 1
sanboot ${root-path}
The user says he resolved the problem. But i don't understand. Can anyone explain in simple....
Does he says to compile it manually?
Its looks like some kind of programming.
--- a/src/drivers/net/realtek.c
+++ b/src/drivers/net/realtek.c
@@ -988,8 +988,8 @@ static void realtek_poll ( struct net_device *netdev ) {
/* Check for and acknowledge interrupts */
isr = readw ( rtl->regs + RTL_ISR );
- if ( ! isr )
- return;
+ // if ( ! isr )
+ // return;
writew ( isr, rtl->regs + RTL_ISR );
/* Poll for TX completions, if applicable */
@@ -997,7 +997,7 @@ static void realtek_poll ( struct net_device *netdev ) {
realtek_poll_tx ( netdev );
/* Poll for RX completionsm, if applicable */
- if ( isr & ( RTL_IRQ_RER | RTL_IRQ_ROK ) )
+ // if ( isr & ( RTL_IRQ_RER | RTL_IRQ_ROK ) )
realtek_poll_rx ( netdev );
/* Check link state, if applicable */
Edited by pazhanii, 30 March 2016 - 01:12 PM.