Greetings I have been building a boot flash drive that boots linux and windows using a method posted here jaklaz and a couple others. I get the following boot error trying to load the windows image
Loading boot sector...booting.
Any ideas?
thanks,
hikenboot
ERD/Linux Dual Boot using syslinux error
Started by
hikenboot
, Sep 30 2007 04:08 PM
3 replies to this topic
#1
Posted 30 September 2007 - 04:08 PM
#2
Posted 30 September 2007 - 07:00 PM
Any ideas?
Several ones!
Mainly:
1) I guess you should change your nick to hikenNOTboot
2) You could re-use the "Standard Reply #32" given here:
http://www.boot-land...?...2587&hl=#32
Seriously, if you do not report EXACTLY what you did, there is no way for us to help you.
Please check "Common Sense Advice" in Rules:
http://www.boot-land...?act=boardrules
with particular attention to point #d.
And post some details.
Also, my nick is jaclaz, not jaklaz, it's not a problem the mis-spelling , but if you did a similar one while doing any of the procedures to make a USB flash drive bootable, that could be the reason why it does not work.
jaclaz
#3
Posted 25 April 2008 - 07:17 AM
Hi,
i have the same problem.
My USB Stick is booting already.
I can boot Floppy images linke Partitionmagic & co.
I can also boot Puppylinux and DSLinux.
But i tried to boot the ERD Commander (2k3), and it won't do it.
I've read severel pages of this an another Forum, and i do all what there is written but it doesen't work.
Can u help me?
note:
i made it this way, using syslinux:
http://www.911cd.net...o...c=18846&hl=
i also modded the iso like this:
http://www.911cd.net...showtopic=10482
if i boot the erd, it will load the files in ram, but then, when the erd start, i get de error "txtsetup.sif is missing"
i got the suspicion that there is no access to the iso from erd....
have u an idea?
thank you very much!
ps. my english isn't very good, i'm form germany...
so excuse my miss-spelling
i have the same problem.
My USB Stick is booting already.
I can boot Floppy images linke Partitionmagic & co.
I can also boot Puppylinux and DSLinux.
But i tried to boot the ERD Commander (2k3), and it won't do it.
I've read severel pages of this an another Forum, and i do all what there is written but it doesen't work.
Can u help me?
note:
i made it this way, using syslinux:
http://www.911cd.net...o...c=18846&hl=
i also modded the iso like this:
http://www.911cd.net...showtopic=10482
if i boot the erd, it will load the files in ram, but then, when the erd start, i get de error "txtsetup.sif is missing"
i got the suspicion that there is no access to the iso from erd....
have u an idea?
thank you very much!
ps. my english isn't very good, i'm form germany...
so excuse my miss-spelling
#4
Posted 25 April 2008 - 07:54 AM
Cannot say right now what could be the problem, but do recheck what you did against this one:
http://www.911cd.net...o...19676&st=34
DO NOT use ERD on a PC running VISTA:
http://www.911cd.net...o...19676&st=23
If it's ok for you using a disk img instead of a .iso, check this also:
http://www.boot-land...?showtopic=2958
jaclaz
http://www.911cd.net...o...19676&st=34
DO NOT use ERD on a PC running VISTA:
http://www.911cd.net...o...19676&st=23
If it's ok for you using a disk img instead of a .iso, check this also:
http://www.boot-land...?showtopic=2958
jaclaz
0 user(s) are reading this topic
0 members, 0 guests, 0 anonymous users