duble click on created button and in coming window use settings as
Hello,Now it is time to make command buttons,and write needed commands for each button ,so we continue:
2_1.In menue bar go to control then Button ,click in working window and drag as your needed size(see figure below):
duble click on created button and in
coming window use settings as
:
By the Command shown in figure above,after finishing project and booting by created CD(or DVD),by cliking on [F1] Boot from 1st hard disk button (or typing F1 and pressing Enter ),the computer will boot normally.
NOTE:In next paragraph
3_3 I will talk you about commands
2_2.We should Do the same process for all buttons and should type correct commands for each of them ,Because after finishing project and making multiboot CD(or DVD) and booting by that , clicking each button should do appropriate job.if we have not write correct command , the program will
not do any thing or system will lock.(refer to paragraph 3_3 about commands).
Also we can place progress bar as figure below.(for progress bar go to control then progress bar in menu,and do as you did with other buttons.)
3_3(Commands): The program suports several kinds of commands that you can see some of them below:
|
Name |
Title |
Command |
| Bcdw.gmd | ISO Emu(bcdw) | bcdw (cd)/images/ati.iso |
| Bootsect_Fdd.gmd | Boot from floppy disk | chainloader (fd0)+1 |
| Bootsect_Hdd.gmd | Boot from 1st partition | chainloader (hd0,0)+1 |
| cmd.gmd | Console Mode | commandline |
| diskemu.gmd | Disk Emulation(ISOEmu) | run (hd0,0)/images/msdos.gz |
| isoemu.gmd | ISO boot(ISOEmu) | isoemu (hd0,0)/airboot/demo.iso |
| Powerdown.gmd | Power down | halt |
| reboot.gmd | reboot | reboot |
| submenu.gmd | Call Submenu | airmenu (cd)/airboot/submenu.gz |
Examples of Using Commands:
(A). If we want to restart by clicking a button:
Double click on button,in coming window (figure below) ,place check mark on top left side,then click on T: and then selrct reboot and click
on OK.
and in next window (figure below) click apply and then ok.
(B). If we want to start for example Partitio Magic (we have put it's image file in ...\IMAGES\PMP8.IMA directory befor), we do as above ,just
after clicking T.., we select bcdw then in next widow we change the command as below:
bcdw (cd)/images/pmp8.ima
3_4_Now it is time to finish our small tutorial,Click on generete as figur below
and in coming window (figure below) type a name for your menu,type some comments ,select cursor,then click on Go button
Will be Continued and after finishing making menu process exit that window.
Click on Deploy button (figure below):
and in coming window Do as figure below:
now click next and in next window do as figure below:
The program will make the aero.iso in c,then will ask you do you want to test iso and if you accept it will show that for you.
you can add your needed programes to iso and burn it.
NOTES:this was a short tutor about aero studio ,I have made A multiboot DVD that do jobs below:
1.installs some kinds of windows
2.runs reatogo (live XP)
3.Hack XP adminstrator password
4.runs hiren,s Boot CD
and about 10 more programs
if you have a question , i will be happy to be in your sevice.you can Email me
MCS group,Shirin
Email: mag_azar@yahoo.com