I have started working with WinPE as well as Dell Command | Configure to automate the process of changing BIOS settings. I setup Simulators which often require me to set BIOS settings on dozens or even hundreds of computers. I have gotten WinPE and Command | Configure to work and the process is automated but I wanted to know if there is any way to modify the startnet.cmd file after the ISO is built.
I basically ran the following commands to setup a WinPE boot:
-copype amd64 C:\WinPE
-Dism /Mount-Image /ImageFile:"C:\WinPE\media\sources\boot.wim" /index:1 /MountDir:"C:\WinPE\mount"
-Here is where I would modify my Startnet.cmd file as I wanted it
-Dism /Unmount-Image /MountDir:"C:\WinPE\mount" /commit
-MakeWinPEMedia /ISO C:\WinPE c:\WinPE\WinPE.iso
I now have my WinPE.iso file. If I decided I wanted to go back and modify my Startnet.cmd file to add other things to it, is this possible to open the ISO and modify it there? I was unable to locate Startnet.cmd in my .iso. Is the only way to fix this file to go through and run through all the commands again? Thank you in advance for the help.