[NotActiveProject] Multi 7PEs
#51
Posted 27 November 2009 - 02:56 PM
Thanks always for your reply.
I'll check when I arrive home.
YahooUK
#52
Posted 27 November 2009 - 08:43 PM
1.
In shell\0-explorer.script
classes.reg in Reg.7z include some wrong lines
at the bottom of the reg file, the clsid should be in hklm\wb-software\classes\clsid
not in hk_classes_root\....
2.
in build\1-copyfiles.script, line 34
"CommandFileCopy " seems to be a mistake.
3.
Copy nls should from installsrc,
if copied all nls from bootsrc, a chinese version failed boot.
#53
Posted 27 November 2009 - 09:58 PM
Yes. Classes registries are wrong input into wb-hklm classes.
I've repaired just now.
This line is not error. intend to delete .bin file.If,ExistFile,%TargetDir%\Boot\Bootfix.bin,CommandFileDelete,%TargetDir%\Boot\BootFix.bin
Copy nls files are need to be changed with some exact nls files.
Please give a time to do all be done and will upload soon.
B Regards,
YahooUK
#54
Posted 28 November 2009 - 05:07 AM
Thanks a lot, Zhang Heng.
Yes. Classes registries are wrong input into wb-hklm classes.
I've repaired just now.
This line is not error. intend to delete .bin file.
Copy nls files are need to be changed with some exact nls files.
Please give a time to do all be done and will upload soon.
B Regards,
YahooUK
but wb does not know "CommandFileDelete", is it just "FileDelete"?
#55
Posted 28 November 2009 - 08:06 AM
at least for me such script line doesn't delete the file
#56
Posted 28 November 2009 - 01:00 PM
i think there is no such script command: "CommandFileDelete",
at least for me such script line doesn't delete the file
Thanks dera and Zhang Heng.
Yes, that is totally wrong command for WB. which I recornised from my bad memory. or I was mad.
I copied this command from somewhere for other projects which I can't remember.
I'll change it and upload in next upload.
I've replaced DaRT65.script included erdlogon.bat and uploaded.
BTW, I've found nls files which explained exact language in this forum few days ago, but I can't search now. Can any one point me out, please? Thanks.
B Regards,
YahooUK
#57
Posted 28 November 2009 - 02:42 PM
Oh, it was me.Thanks dera and Zhang Heng.
Yes, that is totally wrong command for WB. which I recornised from my bad memory. or I was mad.
I copied this command from somewhere for other projects which I can't remember.
I'll change it and upload in next upload.
I've replaced DaRT65.script included erdlogon.bat and uploaded.
BTW, I've found nls files which explained exact language in this forum few days ago, but I can't search now. Can any one point me out, please? Thanks.
B Regards,
YahooUK
I deleted it.
In current script, just copy all nls from bootsrc,
We dont need to select some nls to save space.
#58
Posted 28 November 2009 - 06:39 PM
thanks for sharing the script for dart65.
But also the new version does not contain the file erdlogon.bat
regards
#59
Posted 28 November 2009 - 07:36 PM
Thanks,
YahooUK
#60
Posted 28 November 2009 - 10:09 PM
sorry again,
i've downloaded the script and unzipped it. There is a folder tree, some text files and ERDlogon.exe.
I've looked also the attachment, but i've found only the file DaRT65.vbs.
Regards
#61
Posted 28 November 2009 - 11:24 PM
Now, I've uploaded again.
Erdlogon.bat:
cmd.exe /c "x:\windows\system32\erdlogon.exe "x:\sources\recovery\tools\MSDartTools.exe""
Put it in system32 folder. That's it.
B Regards,
YahooUK
#62
Posted 29 November 2009 - 07:55 AM
thanks for your collaboration
regards
#63
Posted 29 November 2009 - 12:47 PM
If,ExistFile,%TargetDir%\Sources\Recovery\Tools\MSDartTools.exe,Add_Shortcut,StartMenu,"MS-DART 6",%SystemRoot%\System32\ERDLogon.exe,"MS-DART Tools",,#$pSystemDrive#$p\Sources\Recovery\Tools\MSDartTools.exe,#$pSystemDrive#$p\Sources\Recovery\Tools\MSDartTools.exe If,ExistFile,%TargetDir%\Program Files\Standalone System Sweeper\mpam-fe.exe,Add_Shortcut,StartMenu,"MS-DART 6",#$pSystemDrive#$p\Program Files\Standalone System Sweeper\mpam-fe.exe,"Standalone System Sweeper" If,ExistFile,%Target_Sys%\COMPMGMT.exe,Add_Shortcut,StartMenu,"MS-DART 6",%SystemRoot%\System32\ERDLogon.exe,"Computer Management",,"#$q%SystemRoot%\System32\COMPMGMT.exe#$q",%SystemRoot%\System32\COMPMGMT.exe If,ExistFile,%Target_Sys%\CrashAnalyze.exe,Add_Shortcut,StartMenu,"MS-DART 6",%SystemRoot%\System32\ERDLogon.exe,"Crash Analyzer",,"#$q%SystemRoot%\System32\CrashAnalyze.exe#$q",%SystemRoot%\System32\CrashAnalyze.exe If,ExistFile,%Target_Sys%\DiskCmdr.exe,Add_Shortcut,StartMenu,"MS-DART 6",%SystemRoot%\System32\DiskCmdr.exe,"Disk Commander" If,ExistFile,%Target_Sys%\DiskWipe.exe,Add_Shortcut,StartMenu,"MS-DART 6",%SystemRoot%\System32\DiskWipe.exe,"Disk Wipe" If,ExistFile,%Target_Sys%\erddiskpart.exe,Add_Shortcut,StartMenu,"MS-DART 6",%SystemRoot%\System32\ERDLogon.exe,"Disk Partitioner",,"#$q%SystemRoot%\System32\erddiskpart.exe#$q",%SystemRoot%\System32\erddiskpart.exe If,ExistFile,%Target_Sys%\ErdHelp.exe,Add_Shortcut,StartMenu,"MS-DART 6",%SystemRoot%\System32%\ERDLogon.exe,"Help",,"#$q%SystemRoot%\System32\ErdHelp.exe#$q",%SystemRoot%\System32\ErdHelp.exe If,ExistFile,%Target_Sys%\ErdRegedit.exe,Add_Shortcut,StartMenu,"MS-DART 6",%SystemRoot%\System32\ERDLogon.exe,"Registry Editor",,"#$q%SystemRoot%\System32\ErdRegedit.exe#$q",%SystemRoot%\System32\ErdRegedit.exe If,ExistFile,%Target_Sys%\FileRestore.exe,Add_Shortcut,StartMenu,"MS-DART 6",%SystemRoot%\System32\FileRestore.exe,"File Restore", If,ExistFile,%Target_Sys%\FileSearch.exe,Add_Shortcut,StartMenu,"MS-DART 6",%SystemRoot%\System32\FileSearch.exe,"File Search" If,ExistFile,%Target_Sys%\HotfixUninstall.exe,Add_Shortcut,StartMenu,"MS-DART 6",%SystemRoot%\System32\ERDLogon.exe,"Hotfix Uninstall",,"#$q%SystemRoot%\System32\HotfixUninstall.exe#$q",%SystemRoot%\System32\HotfixUninstall.exe If,ExistFile,%Target_Sys%\Locksmith.exe,Add_Shortcut,StartMenu,"MS-DART 6",%SystemRoot%\System32\ERDLogon.exe,"Locksmith",,"#$q%SystemRoot%\System32\Locksmith.exe#$q",%SystemRoot%\System32\Locksmith.exe If,ExistFile,%Target_Sys%\SfcScan.exe,Add_Shortcut,StartMenu,"MS-DART 6",%SystemRoot%\System32\ERDLogon.exe,"SFC Scan",,"#$q%SystemRoot%\System32\SfcScan.exe#$q",%SystemRoot%\System32\SfcScan.exe If,ExistFile,%Target_Sys%\SolutionWizard.exe,Add_Shortcut,StartMenu,"MS-DART 6",%SystemRoot%\System32\ERDLogon.exe,"Solution Wizard",,"#$q%SystemRoot%\System32\SolutionWizard.exe#$q",%SystemRoot%\System32\SolutionWizard.exe If,ExistFile,%Target_Sys%\TcpCfg.exe,Add_Shortcut,StartMenu,"MS-DART 6",%SystemRoot%\System32\TcpCfg.exe,"TCP\IP Config"
#64
Posted 29 November 2009 - 03:47 PM
For my point of view, I've just pointed to Main DartTools.exe and selected target dir as follow:
Pic 1 point to erdlogon.
Pic 2 point to target. And done.
But your shortcuts are more beautiful. (Unfortunately, I can't add Shortcuts in my 64bit one)
B Regards,
YahooUK
#65
Posted 02 December 2009 - 05:32 AM
I plug a usb disk after the 7PE started.
The drive letter does not show in MyComputer.
But I can access the drive in cmd, and also the device can be found in device manager and disk management.
Is there any solution?
Thanks
#66
Posted 02 December 2009 - 10:21 AM
Still one problem.
I plug a usb disk after the 7PE started.
The drive letter does not show in MyComputer.
But I can access the drive in cmd, and also the device can be found in device manager and disk management.
Is there any solution?
Thanks
Me too, I'll find out if I've a time.
This might be the driver was'nt installed for PCI to USB RootHubs.
Try to reload PCI drivers.
Thanks for your feedback.
YahooUK
#67
Posted 03 December 2009 - 02:36 PM
I don't think it due to the driver.Me too, I'll find out if I've a time.
This might be the driver was'nt installed for PCI to USB RootHubs.
Try to reload PCI drivers.
Thanks for your feedback.
YahooUK
Because in device manager, the USB device and USB hub installed correctly.
Actually, when I build on vistape, I found the usb device cannot be installed correctly, so I copied all drivers, infs, and the whole driverstore from bootsrc, the problem solved.
I copied all drivers from bootsrc in 7pe, but the drive letter cannot be showed in explorer.
And the usb drive can be accessed in cmd as normal.
I think there must be some services or other daemons to refresh the access entry in explorer.
#68
Posted 03 December 2009 - 04:03 PM
i think soI think there must be some services or other daemons to refresh the access entry in explorer.
that is why i prefer the PE Shell Swapper
i can restart the shell
after restarting the explorer shell the drive letter is assigned to the USB
#69
Posted 05 December 2009 - 11:49 AM
I thought that would relate to Shell Hardware Detect service but NO.
Refleshing PEShell is simple and only way at the moment.
Or use thirtparty tools. (USBDLM or MountStorPE)
Sharing some images what I've done.
Pic 1. PEShell swapper is working.
Pic 2. RightClickContextMenu is working. (Copy to, Move to, Manage, Services, DeviceManager, RegistryEditor, TaskManager)
Pic 3. Desktoolsbar is working.
I'm thinking less people is intrested in this project. I'll stop it after final upload.
B Regards,
YahooUK
#70
Posted 05 December 2009 - 11:55 AM
Please don't, From my personal experience active users (who posts on topics) around boot-land is very low numbered compared with the number of boot-land users who comes to keep up to date.I'm thinking less people is intrested in this project. I'll stop it after final upload.
Personally I wait for your capi integration to introduce a new (currently developing) script
#71
Posted 05 December 2009 - 12:03 PM
I second thisPlease don't
regarding drive letter assigned to the USB
for me e.g. Total Commander or Cubic Explorer can see the drive letter without restarting via PE Shell Swapper,
also e.g. 'explorer /e,' works
#72
Posted 05 December 2009 - 12:19 PM
I am trying to make WOW64 script, for your nice project.I'm thinking less people is intrested in this project. I'll stop it after final upload.
Please let me know, if this is no longer needed
#73
Posted 05 December 2009 - 01:25 PM
I am trying to make WOW64 script, for your nice project.
Please let me know, if this is no longer needed
Thanks for your offer. I'd like to ask you one thing.
For what?
I've wow64 script support most 32 progs and now PEShell swapper is supported.
YahooUK
#74
Posted 05 December 2009 - 01:29 PM
Please don't, From my personal experience active users (who posts on topics) around boot-land is very low numbered compared with the number of boot-land users who comes to keep up to date.
Personally I wait for your capi integration to introduce a new (currently developing) script
OK, I'll upload with CAPI in final one.
Wow script is calling a huge list of files and reg.
PEiso size became over 500mb. I don't think it is worth for a PE.
How do you think?
Thanks.
YahooUK
#75
Posted 05 December 2009 - 01:40 PM
I've only readed first post:Thanks for your offer. I'd like to ask you one thing.
For what?
I've wow64 script support most 32 progs and now PEShell swapper is supported.
Very good you already have a scriptIn the other hand, from 64 bit PE does not support 32bit programs like in real 64bit installed machine.
1 user(s) are reading this topic
0 members, 1 guests, 0 anonymous users