New Feature Script
#51
Posted 02 November 2010 - 11:26 PM
I remember now my famous project
#52
Posted 05 November 2010 - 10:02 PM
Hi Ludovici,How integrate the Windows Seven NetCenter (As on Make_PE3, or MultiPELeopard); what is the registry setting (I think, i have all the files...) ?
try:
networkcenter.7z 13.03KB 73 downloads
lets say it is for test only
i have tried only in ChrisR's 'Win7PE_SE_2010_10_25' project using Windows7 x86 en-US Ultimate RTM source,
nevertheless seems to me also the 'xwizards' script is mandatory
#53
Posted 05 November 2010 - 10:26 PM
Your Script work
#54
Posted 10 November 2010 - 03:41 AM
If you have specific question reguarding your script,Post it here and I will try to accomodate.
My question is this:
Within your script you have Attachments\SxS\2008.7z -> SideBySideXn5.reg
and it's not registered into wb-hive, "Why"
I have included into my wb-hive and can't seem to find any difference:
Please Inform me:
Here's How I did it;
First: Edit SideBySideXn5.reg
Find and Replace;
Find: HKEY_LOCAL_MACHINE\COMPONENTS
Replace: HKEY_LOCAL_MACHINE\WB-COMPONENTS
Replace All, Save SideBySideXn5.reg and Attach it back where it came from;
Here's the code I added inside Feature Pack.script;
Unpack,"SxS","2008.7z","True","%TargetDir%"
Echo,"Getting ready for COMPONENTS into Regedit",WARN
If,ExistFile,"%Target_Sys%\config\COMPONENTS",Begin
Echo,"Loading COMPONENTS into Regedit",WARN
RegHiveLoad,WB-COMPONENTS,"%Target_Sys%\config\COMPONENTS"
ShellExecute,"open","regedit.exe","/s #$q%Target_Sys%\SideBySideXn5.reg#$q"
RegHiveUnLoad,WB-COMPONENTS
End
If,ExistFile,"%Target_Sys%\SideBySideXn5.reg",FileDelete,"%Target_Sys%\SideBySideXn5.reg"
All entries go into COMPONENTS hive and end up in build just fine, but again, I notice no differences. If you have any more info or advice, please inform me.
Thanx Again for your hard work on this script. Good Job
RoyM
#55
Posted 10 November 2010 - 07:35 AM
i suppose ludovici aim to register at boot timeMy question is this:
Within your script you have Attachments\SxS\2008.7z -> SideBySideXn5.reg
and it's not registered into wb-hive, "Why"
as in the [SBS] section at line #7003 i see this line:
TXTAddLine,"%Target_Sys%\autorun.cmd",regedit.exe /s SideBySideXn5.reg,PLACE,2
maybe this script line does not work correctly?
#56
Posted 10 November 2010 - 07:50 AM
Here's how I found that code originaly;
[SBS]
Echo,Processing SidebySide 2008 v.1 For VistaPE...
#
Unpack,"SxS","2008.7z","True","%TargetDir%"
#
#Hive_Load,HKU
#reg_add,0x1,"%reg%\Microsoft\Windows\CurrentVersion\RunOnceEx\0","SxS","Regedit /s X:\Windows\System32\SideBySideXn5.reg"
#Hive_Unload,HKU
#AddAutoRun,"SideBySide","X:\Windows\regedit.exe","/s X:\Windows\System32\SideBySideXn5.reg",1
TXTAddLine,"%Target_Sys%\autorun.cmd",regedit.exe /s SideBySideXn5.reg,PLACE,2
#
As you can see it unpacks but most is commented out.
I was interested in why these were included, ie. "What is it for"
It appears to be for C++, but I notice no difference if included in build.
#57
Posted 10 November 2010 - 08:15 PM
e.g. Avira, Acronis full (not BartPE vesion), etc.
in this case probably it's more efficient to comment out the line 'TXTAddLine,"%Target_Sys%\autorun.cmd",etc.'I'm using NativeEx_Win7 aka(Joshua's Project)
and uncomment the line
AddAutoRun,"SideBySide","X:\Windows\regedit.exe","/s X:\Windows\System32\SideBySideXn5.reg",1
#58
Posted 18 November 2010 - 10:37 PM
Windows Features scripts
Places Windows Features in Projects\Win7pe_SE
It's Script in beta test, if maybe perhaps someone can help me to improve it
#59
Posted 18 November 2010 - 10:57 PM
#60
Posted 20 November 2010 - 02:05 AM
Currently have some issues with a few items...I'm using X64 for the build system (my computer) and the retail, english X86 CD as the source.Hello everybody
Windows Features scripts
Places Windows Features in Projects\Win7pe_SE
It's Script in beta test, if maybe perhaps someone can help me to improve it
1. get an error in the smart card script - will try to get specific error message, but basically, it couldn't find a file to copy. Same thing on the system item "side by side"...had to disable them to get it to complete.
2. not sure what the point of the "power script" script is, since when I select it from the menu, I get a flash, and then it just exits...so something wrong there as well.
3. in the process of tracking down a "crash" in the virtual machine, I get BSOD with wimFsf.sys PAGE_FAULT_IN_NONPAGED_AREA I attached screen shot of the info... Looks like this is from the "fonts" script...General comment about the scripts - lots of stuff in it about all sorts of fonts being added to the registry, without any clue if those fonts are available...There are settings in the project that control if a lot of fonts get added, etc.
Sorry this is still pretty vague - I wanted to at least post what I know now.
Attached Files
#61
Posted 21 November 2010 - 09:07 AM
#62
Posted 21 November 2010 - 09:32 AM
BitLocker is available only in the Enterprise and Ultimate editions of Windows 7. If you are trying to build from another version of Windows 7 (forexample Home Premium) it is normal it can not find the specified files. Other files and registry settings can be because of that or from another reason.
I am building from Windows 7 Ultimate 32-bit but as stated, the folder is completely empty.
Edited by skyide, 21 November 2010 - 09:32 AM.
#63
Posted 21 November 2010 - 09:39 AM
#64
Posted 21 November 2010 - 09:56 AM
this is my bitlocker script,
i use it in my special build,
i always build from Windows 7 en-US x86 RTM (Ultimate) source,
if remember right this script works in ChrisR's 'Win7PE_SE_2010_11_12' project, too
(ChrisR's project uses
install.wim image index=1
and ChrisR's project adds also the full
'HKLMSOFTWAREMicrosoftWindows NTCurrentVersionSvchost'
registry tree - it is an important point i think)
unlocking the encrypted drive via GUI (which available from 'Control Panel') seems to work
bitlocker_1.jpg 73.58KB 42 downloads
bitlocker_2.jpg 64.58KB 40 downloads
so lets say it is for test only:
bitlocker.7z 2.27KB 33 downloads
#65
Posted 21 November 2010 - 10:00 AM
You can try to build from ultimate dvd but did you selected the right image from inside wim
I have not selected anything I just dropped the Windows Features script and proceeded with the build. I am using Win7PE_SE_2010_11_08 (Chris' package).
Please excuse my ignorance, but where is this option, where do you select this? I have not seen it before.
Edited by skyide, 21 November 2010 - 10:02 AM.
#66
Posted 21 November 2010 - 10:12 AM
Thank you dera for script. I deleted bitlocker files for to gain space becase i couldn't see ever it shows usb drives. After that again added the needed files but this time i don't see bitlocker in the control panel.
Want to check your script very much.
#67
Posted 21 November 2010 - 05:28 PM
3. in the process of tracking down a "crash" in the virtual machine, I get BSOD with wimFsf.sys PAGE_FAULT_IN_NONPAGED_AREA I attached screen shot of the info... Looks like this is from the "fonts" script...
Think that is a "pack" issue. Try this:
In ”Finalize” > ”Postconfig” choose ”Maximum” compression!
#68
Posted 22 November 2010 - 07:45 AM
http://www.boot-land...?showtopic=2932
http://www.boot-land...?showtopic=2811
http://www.w7forums....-error-t89.html
http://www.tomshardw...-windows-system
I haven't read through but they all talk about wimfs.sys
#69
Posted 22 November 2010 - 08:39 AM
verrrrrrry nice indeed , THANKS a lot.
on coding, interface , organisation I like your style
I get errors and warnings in
Windows Control Panel Fonts
Windows Control Panel Card
Windows .NET Framework v2.0.50727
Windows SideBySide
Windows Control Panel Card is easy to fix
+
remove line: FileCopy,%InstallSRC%\Windows\System32\scfilter.sys,%TargetDir%\Windows\System32
(line is wrong and cause error + there is already Require_File,drivers\scfilter.sys)
+
FileCopy,%InstallSRC%\Windows\System32\smartcrd.inf,%TargetDir%\Windows\System32
-->
FileCopy,%InstallSRC%\Windows\inf\smartcrd.inf,%TargetDir%\Windows\inf
rest all about regwriting.....
Well, I do not have much free time these days to comment and work more, in time one by one.....
If you can put the .reg files you have inside rest of 3 scripts in your next package as references, I guess solutions will come much more easly .
Thanks a lot again, Keep the good work
#70
Posted 22 November 2010 - 03:26 PM
OK, and will also try the pack to MAX, although not sure why that would matter...sbaeder, try these:
http://www.boot-land...?showtopic=2932
http://www.boot-land...?showtopic=2811
http://www.w7forums....-error-t89.html
http://www.tomshardw...-windows-system
I haven't read through but they all talk about wimfs.sys
#71
Posted 22 November 2010 - 06:49 PM
Thanks for all your reply
I don't understand, VvuratNormally ludovici always forget or skip to put such a button need to search inside scripts.
Vvurat please don't use Ultimate.script in Winbuilder Project (I have also this Error ); it's just for demonstration...
Have you progress on my Question about A Multilanguage Software Hive with Winbuilder ?
Thanks again for your good work, Vvurat
Sbaeder, have you test With : In ”Finalize” > ”Postconfig” choose ”Maximum” compression! ?
I have also, again this error...get an error in the smart card script - will try to get specific error message, but basically, it couldn't find a file to copy. Same thing on the system item "side by side"...had to disable them to get it to complete.
I will update my script, i think tomorrow:
New BitLocker, Audio, SideBySide, rdp, fax Script...
Somebody can help me on Windows 7 Boot Updater and Hide, give me hide example ?
#72
Posted 22 November 2010 - 08:20 PM
Means there is no checkbox to select which image in install.wim will be used. Which edition.
A Multilanguage Software Hive with Winbuilder.
Hımm. Strange idea. My first answer could be "NO". But when i write this lines i had another idea. It can be possible. Tell me which languages you want. I can integrate that languages to install.wim with dism and can take that Software.hiv with all languages integrated. Modify that and send to you. If dism works on that hive to change language it can be perfect. You can change language only with (Dism /image:C:\test\offline /Set-AllIntl:fr-FR) If dism not works on it need to change language with a new language script and reg files.
pt-pt;ru-ru;de-de;tr-tr;fr-fr;it-it;nl-nl enough?
I can make a universal software.hiv for theese languages. only thing you will do is copy software.hiv inside winpe. I will send seperate reg files for different languages that needs to change in that software.hiv for desired language. You will do a script that has languages with checkbox. When a language checked script will import the change language reg files to that software.hiv?
What is your idea?
#73
Posted 22 November 2010 - 10:41 PM
Yes, for me is enoughpt-pt;ru-ru;de-de;tr-tr;fr-fr;it-it;nl-nl enough?
I like this idea // checkbox will be pt-pt;ru-ru;de-de;tr-tr;fr-fr;it-it;nl-nlI can make a universal software.hiv for theese languages. only thing you will do is copy software.hiv inside winpe. I will send seperate reg files for different languages that needs to change in that software.hiv for desired language. You will do a script that has languages with checkbox. When a language checked script will import the change language reg files to that software.hiv?
I have already create a System.Hiv script, if you want... I can make this new script
How see you The system.Hiv script ? all the entire registry or just few part (Services...) separate with CheckBox (I have already work with the system hive, in the goal to separate the windows features)
#74
Posted 22 November 2010 - 10:47 PM
D:\Yenim>Dism /image:C:\a /Add-Package /PackagePath:"c:\nl-nl\lp.cab"
Deployment Image Servicing and Management tool
Version: 6.1.7600.16385
Image Version: 6.1.7600.16385
Processing 1 of 1 - Adding package Microsoft-Windows-Client-LanguagePack-Package
~31bf3856ad364e35~x86~nl-NL~6.1.7600.16385
[===========================99.9%========================= ]
An error occurred - Microsoft-Windows-Client-LanguagePack-Package Error: 0x80070
5aa
Error: 1450
#75
Posted 22 November 2010 - 10:59 PM
Somebody can help me on Windows 7 Boot Updater and Hide, give me hide example ?
I can help on hide .
you can find following in active projects (ex: VistaPE-Capi, Win7PESE, Leopard, .......)
http://www.mediafire...wmn77eeiwsm95xr
on scripting when I need, I write
If,Not,ExistFile,%target_sys%\hiderun.exe,FileCopy,%Tools%\%SourceArch%\hiderun_%SourceArch%.exe,%target_sys%\hiderun.exe
and usage
hiderun.exe C:\test\mybatch.cmd
hiderun.exe /w C:\test\mybatch.cmd
hiderun.exe /w mybatch.cmd --------> mybatch in system32...
(more info: check hiderun_Info.txt + double click hiderun.exe)
reason using hiderun.exe is:
natural reason is hiding .cmd files (cmd.exe),
also console (cmd) applications cause cmd window popup,
(even if you do not open cmd.exe window previously, such applications open cmd window itsself to process ex: 7z.exe)
on pe1 it is mostly used with runonce.. entries,
One can also use hiderun.exe when creating shortcuts for .cmd files .
as a result, cmd window target file will not popup when you use hiderun.
ps: most scripting languages also have this feature inside (ex/ wb: shellexecute,hide,... js: ask amalux au3:... ) , hiderun.exe is a small application that is used for same goal when one do not want to spend time (or space) with scripting/coding.
0 user(s) are reading this topic
0 members, 0 guests, 0 anonymous users