USB3 issues
#26
Posted 27 April 2012 - 07:44 PM
#27
Posted 27 April 2012 - 08:30 PM
Did they just not work or gave device manager an error?
Could they get installed at all?
#28
Posted 27 April 2012 - 08:43 PM
all usb devices appeared with errors in device manager
whereas as when it works - it shows AMD USB3.0 host and controller
#29
Posted 27 April 2012 - 08:50 PM
#30
Posted 27 April 2012 - 09:11 PM
#31
Posted 27 April 2012 - 09:21 PM
Possible error reach from, driver being incompatible with Win7, to missing dependencies, to a required reboot.
Unless i have some idea, what the problem is, i can't try to fix it. Assuming of course, you're interested in getting this to work and are not already satisfied with the other solution.
#32
Posted 27 April 2012 - 10:26 PM
My other solution works - but I am quite happy to try and help so we can get this working for everyone
Will post an update tomorrow
#33
Posted 27 April 2012 - 10:31 PM
these were obtained from the resource CD that came with the Dell Vostro laptop - I just added them all using zzz_drivers.script and then the AMD USB3.0 Host and Controller appeared fine and PE booted fine and usb was accessible
The files it showed in device manager for these two devices were amdxhc.sys and amdhub30.sys
#34
Posted 27 April 2012 - 11:13 PM
EDIT: LINKS REMOVED
tried to install the win8_usb3 drivers and get error as per image 3
EDIT: LINK REMOVED
#35
Posted 28 April 2012 - 12:13 AM
Will have a look tomorrow.
Good night.
#36
Posted 28 April 2012 - 12:23 AM
Had a look at the zip file you posted, that thing only seems to miss the kitchen sink.
Try if it is enough to just use the:
amdhub30.inf
amdhub30.sys
amdxhc.inf
amdxhc.sys
#37
Posted 28 April 2012 - 08:41 AM
Never asked you, if you use a 32Bit or 64Bit PE and just send you the 32Bit drivers.
So here it comes : Do you use a 32Bit or 64 Bit PE?
#38
Posted 28 April 2012 - 09:25 AM
Never asked you, if you use a 32Bit or 64Bit PE
Seems to be 32Bit.x86
There are more USB3 dependencies at Windows 8. And check each *.sys depends in addition.
http://msdn.microsof...2(v=vs.85).aspx
http://msdn.microsof...6(v=vs.85).aspx
Driver references kernel and hal too.
Windows 8 USB driver may fail at Windows 7. I had no luck too month ago.
#39
Posted 28 April 2012 - 10:53 AM
32-bitSorry Darren!
Never asked you, if you use a 32Bit or 64Bit PE and just send you the 32Bit drivers.
So here it comes : Do you use a 32Bit or 64 Bit PE?
#40
Posted 28 April 2012 - 10:53 AM
will give it a try shortly and report backHoly ...!
Had a look at the zip file you posted, that thing only seems to miss the kitchen sink.
Try if it is enough to just use the:
amdhub30.inf
amdhub30.sys
amdxhc.inf
amdxhc.sys
#41
Posted 28 April 2012 - 11:11 AM
AMD USB 3.0 Host Controller - twice in device manager showing as working okay
But USB memory stick still not accessible
#42
Posted 28 April 2012 - 11:32 AM
#43
Posted 28 April 2012 - 12:48 PM
have narrowed it down to the contents of the hseries folder in that zip - if I install just those drivers using zzz_Drivers.script then usb 3.0 works fine - hopefully this will help narrow down causeHoly ...!
Had a look at the zip file you posted, that thing only seems to miss the kitchen sink.
Try if it is enough to just use the:
amdhub30.inf
amdhub30.sys
amdxhc.inf
amdxhc.sys
image 4 here shows device manager when it is all working okay - http://www.pcassistonline.co.uk/4.jpg
#44
Posted 28 April 2012 - 01:57 PM
#45
Posted 28 April 2012 - 02:38 PM
yes those reduced drivers work fine when installed using zzz_drivers script with box ticked to "load drivers at startup" - PE boots fine and usb drives are accessibleTry it with this further reduced package. http://depositfiles....files/54q2ujllk
#46
Posted 28 April 2012 - 04:50 PM
Will later see, what i can dig up in Win8.
NEC and Reanas have only 2 drivers.
Would be nice if some other members, who have USB 3.0, would also be interested in testing.
#47
Posted 29 April 2012 - 03:10 PM
And it doesn't look good. Seems M$ has finally made good on their thread to change the driver model to something incompatible.
Will probably add the AMD drivers to the Renease and NEC driver in the USB 3.0 script and add a dialog to choose the driver for testing purposes. Hopefully we will find enough testers to get a meaningful statistic.
#48
Posted 29 April 2012 - 05:37 PM
Excellent - thanks for all your help MedEvilSince i don't have USB 3 controller to test on, i did some tests with the Win8 default VGA drivers in Win7.
And it doesn't look good. Seems M$ has finally made good on their thread to change the driver model to something incompatible.
Will probably add the AMD drivers to the Renease and NEC driver in the USB 3.0 script and add a dialog to choose the driver for testing purposes. Hopefully we will find enough testers to get a meaningful statistic.
I have access to some other USB 3 controllers - so will test the update script on these when its done
#49
Posted 29 April 2012 - 06:54 PM
#50
Posted 29 April 2012 - 07:55 PM
@allJust thought USB3 should be something considered to be added to the default 7PE build rather than having to add drivers afterwards? or using zz_drivers / driverpacks
How to provide USB drivers in that case?
Idea1: Use default .script zz_drivers, but add a USB30_x86.7z files USB30_amd64.7z
Can *.7z files added to a winbuilder project server?
Idea2: Or include USB3 drivers to a script, extract files to Workbench\Common\Drivers_x86\USB30\
Run zz_drivers to include drivers to PE.
Idea2: Or include USB3 drivers to a script and run dism.exe from the script.
Any other idea?
0 user(s) are reading this topic
0 members, 0 guests, 0 anonymous users