Error:
Installation Failed: J:\I386\asms. Error Message : The parameter is incorrect.
***
Fatal Error:
One of the components that Windows needs to continue setup could not be installed.
The parameter is incorrect.
***
#51
Posted 20 January 2014 - 09:12 AM
#52
Posted 20 January 2014 - 10:13 AM
Error:
Installation Failed: J:\I386\asms. Error Message : The parameter is incorrect.
Did you use the map --e820cycles=0 fix also in the Continue GUI-mode XP Setup entry in menu.lst
It will be probably needed there as well.
You can try in VHD_XP_Create to Select the Checkbox Load XP Setup ISO in RAM.
That might help to overcome the error.
What is the Size of your XP Setup ISO file and did you check if it is fragmented ?
Did you prepare it according to Section 2 http://reboot.pro/to...hd/#entry172481
Certainly required is:
Use DPsBase.exe to Integrate DriverPacks Chipset + Processor + MassStorage + LAN + WLAN DriverPackswhich will then be located in OEM Folder in your XPSOURCE folder.(settings Disc - Method 2 - GuiRunOnce - Enable KTD for the DriverPacks I will Select)
#53
Posted 20 January 2014 - 12:22 PM
Did you use the map --e820cycles=0 fix also in the Continue GUI-mode XP Setup entry in menu.lst
It will be probably needed there as well.
yes
You can try in VHD_XP_Create to Select the Checkbox Load XP Setup ISO in RAM.
That might help to overcome the error.
Gives error in TXT-mode Setup
What is the Size of your XP Setup ISO file and did you check if it is fragmented ?
517 MB
yes
Did you prepare it according to Section 2 http://reboot.pro/to...hd/#entry172481
Yes
and i have already sp3 (the iso is original sp3)
but from "Use DriverForge.v4.5.4.exe" i did not do that
steps i did:
extract iso
Integrate DriverPacks Chipset + Processor + MassStorage + LAN + WLAN
(settings Disc - Method 2 - GuiRunOnce - Enable KTD for the DriverPacks I will Select)
create iso with same boot loader
AND what does winvblock driver do
Edited by Basel Sayeh, 20 January 2014 - 12:29 PM.
#54
Posted 20 January 2014 - 12:36 PM
The asm error indicates that virtual CD drive is not found in Continue GUI mode XP Setup.
It should be solved by loading XP setup ISO to RAM by using --mem option.
Strange that TXT-mode gives problem for that case.
You can try to use proposed Checkbox but remove --mem option in TXT mode afterwards.e.g. use something like
map /XP3_1307.iso (0xff)
DriverForge is not the problem.
Your XP Setup CD is rather small.
Did you use nLite to reduce size. That might be the reason .....
Start with original XP3 Setup CD and add the 5 DriverPacks as described.
Make new XP Setup ISO file and copy it to root next to where XP-1.vhd will be created.
Remove old stuff and use VHD_XP_Create.exe again to make new XP-1.vhd and menu.lst entries.
#55
Posted 20 January 2014 - 12:39 PM
Your XP Setup CD is rather small.
Did you use nLite to reduce size. That might be the reason .....
Start with original XP3 Setup CD and add the 5 DriverPacks as described.
i didnt touch n-lite
Strange that TXT-mode gives problem for that case.
You can try to use proposed Checkbox but remove --mem option in TXT mode afterwards.e.g. use something like
map /XP3_1307.iso (0xff)
i will try that
#56
Posted 20 January 2014 - 12:53 PM
It should be solved by loading XP setup ISO to RAM by using --mem option.
not solved
gives me 7-zip not found error and "please insert windows xp sp3 cd"
Strange that TXT-mode gives problem for that case.
gives me cd could not be found
#57
Posted 20 January 2014 - 12:57 PM
gives me cd could not be found
But TXT-mode was working for you previously.
Use same settings in menu.lst as used before to launch TXT-mode
#58
Posted 20 January 2014 - 12:59 PM
But TXT-mode was working for you previously.
Use same settings in menu.lst as used before to launch TXT-mode
Yes starts txt mode
and when i chose harddisk gives me error
#59
Posted 20 January 2014 - 01:01 PM
here is my menu.lst
title Continue GUI-mode XP Setup on XP-1.vhd - WinVBlock driver - 10000 MB
find --set-root --ignore-floppies /winxpFirst.iso
map --mem /winxpFirst.iso (0xff)
map --rd-size=2048
map --mem (rd)+4 (0x55)
map --e820cycles=0
map --hook
write (0x55) #!GRUB4DOS\x00v=1\x00/winxpFirst.iso\x00\xff\x00
find --set-root --ignore-floppies /XP-1.vhd
map --mem /winvblock.ima (fd1)
map --mem /winvblock.ima (fd0)
map /XP-1.vhd (hd0)
map --rehook
root (hd0,0)
chainloader /ntldr
title Start - TXT-mode XP Setup on XP-1.vhd - WinVBlock driver - 10000 MB
find --set-root --ignore-floppies /winxpFirst.iso
map --mem /winxpFirst.iso (0xff)
map --rd-size=2048
map --mem (rd)+4 (0x55)
map --e820cycles=0
map --hook
write (0x55) #!GRUB4DOS\x00v=1\x00/winxpFirst.iso\x00\xff\x00
find --set-root --ignore-floppies /XP-1.vhd
map --mem /winvblock.ima (fd1)
map --mem /winvblock.ima (fd0)
map /XP-1.vhd (hd0)
map --rehook
chainloader (0xff)
title Boot Windows XP from Image - XP-1.vhd - WinVBlock driver - 10000 MB
find --set-root --ignore-floppies /XP-1.vhd
map /XP-1.vhd (hd0)
map --hook
root (hd0,0)
chainloader /ntldr
#60
Posted 20 January 2014 - 01:08 PM
Filename XP Setup ISO is too long and must be according to dos 8.3
So rename and use e.g. winxp1.iso
Try first to Install in 2000 MB VHD (use default setting 2 GB)
#61
Posted 20 January 2014 - 01:25 PM
Filename XP Setup ISO is too long and must be according to dos 8.3
So rename and use e.g. winxp1.iso
Try first to Install in 2000 MB VHD (use default setting 2 GB)
it is winxpFirst.iso
F:\winxpFirst.iso
i will try
#62
Posted 20 January 2014 - 01:49 PM
tried
with same error
in mem mode
setup could not find windows cd
after selecting hdd
in normal mode (without mem)
txt setup completes
but in gui setup
i see 7-zip extacting window
then error
"Installation Failed: J:\I386\asms. Error Message : The parameter is incorrect."
#63
Posted 20 January 2014 - 02:01 PM
map --e820cycles=0
map --rehook
#64
Posted 20 January 2014 - 02:30 PM
I think you need to have lines also just before rehook like this
map --e820cycles=0
map --rehook
same errors
ive tested the same winxp iso in Oracle VM VirtualBox and it was booted normaly
what is wrong???????
Edited by Basel Sayeh, 20 January 2014 - 03:04 PM.
#65
Posted 20 January 2014 - 04:30 PM
After TXT-mode Setup we can inspect your XP-1.vhd
Boot with normal OS and use R-mouse to Mount XP-1.vhd in ImDisk Virtual drive.
Then in mounted XP-1-VHD drive go to Windows\system32 and copy file $winnt$.inf to your local Harddisk.
Double-click on $winnt$.inf and mask your ProductKey like ProductKey=xxxxx
Post your modified $winnt$.inf as attachment to this forum so that I can study on it ....
#66
Posted 20 January 2014 - 04:54 PM
After TXT-mode Setup we can inspect your XP-1.vhd
Boot with normal OS and use R-mouse to Mount XP-1.vhd in ImDisk Virtual drive.
Then in mounted XP-1-VHD drive go to Windows\system32 and copy file $winnt$.inf to your local Harddisk.
Double-click on $winnt$.inf and mask your ProductKey like ProductKey=xxxxx
Post your modified $winnt$.inf as attachment to this forum so that I can study on it ....
OK and i dont need imdisk
because im using win7
Edited by Basel Sayeh, 20 January 2014 - 04:55 PM.
#67
Posted 20 January 2014 - 04:58 PM
[OemInfFiles]
OemInfName = "oemscs01.inf"
OemDriverFlags = "1"
OemDriverPathName = "%SystemRoot%\OemDir"
[GUIRunOnce]
command9 = "%SystemDrive%\DPsFnshr.exe"
[Unattended]
DriverSigningPolicy = "Ignore"
NonDriverSigningPolicy = "Ignore"
[Data]
OemDrivers = "OemInfFiles"
unattendedinstall = "yes"
floppylessbootpath = "no"
producttype = "winnt"
standardserverupgrade = "no"
winntupgrade = "no"
win9xupgrade = "no"
win31upgrade = "no"
sourcepath = "\device\cdrom1\"
MsDosInitiated = "No"
dospath=J:\
#68
Posted 20 January 2014 - 06:05 PM
Try modified file $winnt$.inf
Mount XP-1.vhd and in $winnt$.inf Remove dospath=J:\
Save file and Unmount XP-1.vhd
Reboot from Grub4dos menu and try to Continue GUI mode XP Setup.
#69
Posted 20 January 2014 - 07:01 PM
Try modified file $winnt$.inf
Mount XP-1.vhd and in $winnt$.inf Remove dospath=J:\
Save file and Unmount XP-1.vhd
Reboot from Grub4dos menu and try to Continue GUI mode XP Setup.
Same problem
#70
Posted 20 January 2014 - 07:45 PM
Do you read the file /winxpFirst.iso from a USB drive?
Try a internal hard disk.
Which hardware do you use? Which BIOS do you use?
#71
Posted 20 January 2014 - 08:04 PM
@Basel Sayeh
Do you read the file /winxpFirst.iso from a USB drive?
Try a internal hard disk.
Which hardware do you use? Which BIOS do you use?
no
i dont use usb for booting iso
acer aspire 5750
3g ram
intel core i3
win7
Insyde H2O rev 3.5
v1.21
Edited by Basel Sayeh, 20 January 2014 - 08:08 PM.
#72
Posted 21 January 2014 - 09:26 AM
@Basel Sayeh
The problem is that Virtual XP Setup CD in your case is not found in GUI mode of XP Setup.
To overcome your problem you can try a NEW modified way of Install XP in VHD.
3. Use WinNTSetup v3.2 - click on XP tab - Right-click to Select XP Setup ISO file
Select as Boot Drive and as Installation Drive the ImDisk Virtual drive of mounted XP-1.vhd
Click Setup to prepare $WIN_NT$.~BT and $WIN_NT$.~LS folders in XP VHD
http://www.msfn.org/...winntsetup-v32/
4. Use menu.lst on Target Boot Drive which has following entry in Grub4dos Boot Menu
5. Take care that winvblock.ima is found next to XP-1.vhd
6. Reboot to Install XP in VHD - Start TXT-mode and then reboot 2x with Grub4dos menu Boot Windows XP
title Start - TXT-mode XP Setup on XP-1.vhd - WinVBlock driver - 2000 MBfind --set-root --ignore-floppies /XP-1.vhdmap --mem /winvblock.ima (fd1)map --mem /winvblock.ima (fd0)map /XP-1.vhd (hd0)map --hookroot (hd0,0)chainloader /ntldrtitle Boot Windows XP from Image - XP-1.vhd - WinVBlock driver - 2000 MBfind --set-root --ignore-floppies /XP-1.vhdmap /XP-1.vhd (hd0)map --hookroot (hd0,0)chainloader /ntldr
#73
Posted 21 January 2014 - 10:37 AM
Will this work on a USB HDD, SATA HDD or IDE HDD only?
#74
Posted 21 January 2014 - 10:47 AM
Will this work on a USB HDD, SATA HDD or IDE HDD only?
SATA or IDE HDD drive can be used as location for XP VHD file.
USB drive or HDD drive can be used for boot files e.g. booting with Grub4dos Boot Menu.
I have not tested yet using XP VHD located on USB HDD,
but that might be possible but requires to Integrate Wait4UFD driver in XP Setup Source
Direct Install of XP in VHD on USB requires to Integrate Wait4UFD driver in XP Setup Source
http://reboot.pro/to...it/#entry167235
#75
Posted 21 January 2014 - 11:37 AM
@Basel Sayeh
The problem is that Virtual XP Setup CD in your case is not found in GUI mode of XP Setup.
To overcome your problem you can try a NEW modified way of Install XP in VHD.
1. Use VHD_XP_Create.exe to make XP-1.vhd as usual with Grub4dos Boot Menu on Target Boot Drive
2. Mount XP-1.vhd as ImDisk Virtual Drive (ImDisk required !)
3. Use WinNTSetup v3.1 - click on XP tab - Right-click to Select XP Setup ISO file
Select as Boot Drive and as Installation Drive the ImDisk Virtual drive of mounted XP-1.vhd
Click Setup to prepare $WIN_NT$.~BT and $WIN_NT$.~LS folders in XP VHD
http://www.msfn.org/...winntsetup-v31/
4. Modify menu.lst on Target Boot Drive to make following entry in Grub4dos Boot Menu
5. Take care that winvblock.ima is found next to XP-1.vhd
6. Reboot to Install XP in VHD (3x boot with given Grub4dos menu entry)
VHD_XP_WinNTSetup3.png ===> VHD_XP_WinNTSetup.png
Thanks
But new error
setup cannot find winvblock
and the floppy needs format
but i have extracted and solved the problem and finally started winxp
now can i integrate sound-a and sound-b?
i want to reinstall in 10gb vhd
Also tagged with one or more of these keywords: vhd, xp
1 user(s) are reading this topic
0 members, 1 guests, 0 anonymous users