89 replies to this topic

[Lancelot]

Now to move to the next issues, i need to install sata/raid controllers for intel...
i have the files with drivers. 6 files *.sys *.inf *.cat and one *.OEM
how can i integrate this files int live cd?

It may be already integrated ! LiveXP uses Dps packages as default. I use ahci and raid0 disks which have no problem for a long while. If you fail after testing on your hardware (not emulator), you need to provide hwid info of your mass storage so people who knows more info about these stuff can assist you.


@psc
thanks gain, new flag of livexp is BOOTFLAG

@JonF
I have some ideas, need time. A question, does your virtual box have a hd attached ?
ps: At least we know can have Boot folder , will be uploaded in some minutes

[tataee]

Lancelot,
the pack doesn't work for me or at least i don't know which one it is... it didn't show me the actual hdd partition after building the live cd. It never sow me c d e drives that i have on this machine...
beside of this i want to install also the video card ati hd 2600, and the realtek sound card...
what are the steps to integrate a driver? is it hard to accomplish ?

Thanks again Lancelot!

[Lancelot]

Lancelot,
the pack doesn't work for me or at least i don't know which one it is... it didn't show me the actual hdd partition after building the live cd. It never sow me c d e drives that i have on this machine...

How did you test? besides can you attach the mass storages drivers you have so maybe others can take a look at it.

beside of this i want to install also the video card ati hd 2600, and the realtek sound card...

I cant help about integrating driver, as i wrote before i use driver import pe for these sound and video stuff. At least for sound it is better to enable (and provide files) hdaudio script (\LiveXP\Drivers\1 Audio\HDAudio)

[tataee]

it worked fine until now, i'm trying to compile a few drivers... don't know if i'm at the right point...
http://forum.driverp...pic.php?id=1449
here's what i'm trying to do

PS: i have attached my intel raid sata ahci drivers in a 7.z file

Attached Files

•  raid_intel.7z   165.77KB   247 downloads

[Lancelot]

it worked fine until now, i'm trying to compile a few drivers... don't know if i'm at the right point...
http://forum.driverp...pic.php?id=1449
here's what i'm trying to do

you are at WRONG point, please read carelfully what has written to you, use DECENT, unTOUCHED, unMODIFIED source.

besides, the things in the link described already done by LiveXP, so you dont need to integrate dps (or anything) to your souce.


and about your mass storage drivers, if you also attach txt created by this it would help others

[tataee]

well you're right, i was at the wrong point... it didn't work...
at least after integrating the drivers and nlited the folder, the iso obtained worked fine no errors
i used that software provided by you, and i'll attach the txt to this post.


PS: is it possible to integrate the chipset too ?!

Attached Files

•  HWIDs.txt   8.73KB   3768 downloads

[Lancelot]

PS: is it possible to integrate the chipset too ?!

maybe possible, but i havent needed yet

Thanks for the hwid.txt and 7z file, i am not good about mass storage hwids besides i feel you are right, better others who knows better comment on this

[tataee]

thanks for your reply!
can you please tell me what do i need to integrate drivers? what software ? or how it's can be done?
is there any tutorial on this?
i am willing to make a try

[Lancelot]

check the scipts in driver section

[Galapo]

i used that software provided by you, and i'll attach the txt to this post.

HWID for your controller is: VEN_8086&DEV_2829&CC_0106. This is supported by the Driverpacks mass storage pack used in LiveXP. Using it you should have access to your disk.

Regards,
Galapo.

[tataee]

HWID for your controller is: VEN_8086&DEV_2829&CC_0106. This is supported by the Driverpacks mass storage pack used in LiveXP. Using it you should have access to your disk.

Regards,
Galapo.

in the drivers section at point 4, Storage in winbuilder tree, i have selected first time "Build DP Mass Storage Drivers Script" and it didn't work, them I made a new build and selected "DPs-MassStorageDrivers_au3" and it didn't work either (
please guide me a little trough here, i might miss something :|
Thanks!

[Lancelot]

@tataee
I feel they will work after you find a decent (untouched) source, shhhhhhhh

@Galapo
previously it is found out that tataee dont use a decent source

[Galapo]

@Galapo
previously it is found out that tataee dont use a decent source

Script explicitly says that no nlighted source is allowed, but it seems this isn't enough. Any ideas about how to detect nlighted source and provide warning about such or maybe even exit build if detected?

Regards,
Galapo.

[Lancelot]

Any ideas about how to detect nlighted source

In tataee's case, CopyOrExpand,%source_win%\DMADMIN.EXE,%ProjectTemp%\hddimageCMD
failed because tataee dont have dmadmin in source (this maybe related to nlited or not !)

Maybe we can start to collect infos like that one by one in time to put a check at the begining of the build "Decent Source Check" checkbox in "0 - OnProjectRun.script"
I remember a post saying nlite add info to txtsetup.sif i guess, well i hope nlite users can give more detail infos

[tataee]

In tataee's case, CopyOrExpand,%source_win%\DMADMIN.EXE,%ProjectTemp%\hddimageCMD
failed because tataee dont have dmadmin in source (this maybe related to nlited or not !)

pardon me if i'm wrong, but i as far as i know, this wasn't the problem
i got this error because i tried to test a script without a having complete a build before

i don't want you to have a false lead...

PS: to solve this problem i just copied the directory with the files and it worked of course i got other error but this solved my DMADMIN.exe error

[Lancelot]

being sure is easy

do you have DMADMIN.EX_ or DMADMIN.EXE on your xpsp3 source's \i386\ folder

[tataee]

being sure is easy

do you have DMADMIN.EX_ or DMADMIN.EXE on your xpsp3 source's \i386\ folder

yes i have it, and it was there all the time, even in the nlited source, but i forgot to build before, and i just tried to test a script

[Lancelot]

Accept my apalogy, I mixed things a bit
Thanks for helping to clear

[tataee]

Accept my apalogy, I mixed things a bit
Thanks for helping to clear

No problem, you don't have to apologize, i did my best to help you here, to eliminate a false lead

[tataee]

well the error show up again!!
it's at step 84 from 90, and at this step it's importing drivers for Driver Import PE ((

here's the log it says something about the sp2 .... i don't know to read these error logs
since the error log was over 9mb i was forced to upload it to a personal free ftp ((

http://www.hunting-cozia.ro/log/log.7z

[Galapo]

I remember a post saying nlite add info to txtsetup.sif i guess, well i hope nlite users can give more detail infos

Thanks for the hint. New '0 - OnProjectRun.script' is now on the LiveXP server.

Regards,
Galapo.

[Galapo]

@tataee
The error would seem to indicate that you ran out of free space on your drive.

Regards,
Galapo.

[tataee]

@tataee
The error would seem to indicate that you ran out of free space on your drive.

Regards,
Galapo.

yes, but i have 9gb free on the drive where it's building.... i think it's enough ?!?

[Galapo]

Lancelot just PM me that he's working on the fix.

Please download script updates from the LiveXP server. An nLite source modification check is now performed by default.

If you change source to non-modified source, hopefully the DriverPacks mass storage script will get you access to your disk.

Regards,
Galapo.

[Lancelot]

Driver Import PE updated, please download new version