UAC is turned off by using Control Panel > User Accounts and then Reboot to activate.
But mostly I use Tweak checkbox to Disable User Account Contol in WinNTSetup
which is used to Install Win8 by using Win8 Setup ISO file.
Posted 30 June 2013 - 09:08 AM
UAC is turned off by using Control Panel > User Accounts and then Reboot to activate.
But mostly I use Tweak checkbox to Disable User Account Contol in WinNTSetup
which is used to Install Win8 by using Win8 Setup ISO file.
Posted 13 December 2013 - 08:42 AM
Posted 15 December 2013 - 12:10 PM
Posted 16 December 2013 - 10:24 AM
Hi Wimb
This project looks cool and I haven't tried it yet.
Please could you clarify something. You said
Source is Windows 8 x86 or x64 fresh Installed on primary active partition of internal harddisk Or Win8 x64 Pro installed in 15 GB VHD.
So not Win8.1?
So Win8 x86 on VHD as source is not supported? If it is then must it be Pro?
So Enterprise x64 on a VHD as source is not supported - only Pro?
If I did have Win8 on primary partition of an internal hard disk - could I use any version or must it be Pro?
Sorry for confusion but you then talk about Enterprise Win8.1 but this is not mentioned as a suitable source in the previous paragraph.
Assuming I want to only create a mini-8 vhd using VHDs so I can copy the VHD to a USB drive at a later time, how would I do it?
I was going to:
1. Create 10GB VHD under Win7-x64 OS
2. Use WinNTSetup3 to make a working Win8 VHD containing Win8 x86 Pro
3. UseVHD_W8C to make a Portable VHD for use on a different external grub4dos USB drive
thanks
Steve
Posted 16 December 2013 - 02:30 PM
Hi Steve,
Any Win 8 can be used to prepare the Source, but direct install in VHD is only possible with Win 8 Pro.
At the time of writing post #1 then Windows 8.1 was not yet there, but nowadays I think it is best to focus on 8.1
The Enterprise version cannot be installed in VHD, but it can live in VHD as prepared by VHD_W8_Compact.exe program
So in this way you can cross the barrier .... (the vhd driver is present also in Enterprise version).
WinNTSetup3 has button and routine to Create VHD ready for direct Install of Windows 7/8 from ISO using R-mouse Selection (see Video)
In setup of Win8.1 you can use Local Account instead of Microsoft Account by using the Create Account option.
You can use UEFI_MULTI.exe to make other USB-Drive bootable with VHD made with VHD_W8_Compact.exe
Basically it is always a two step process to Make Portable 8 VHD of say 2.5 GB
1. Fresh Install Win8 to partition or 15 GB VHD by using WinNTSetup3
2. Use VHD_W8_Compact.exe to make New VHD from Source prepared in step 1
In this way the New 2.5 GB VHD gets the fresh full registry combined with limited number of files (the essential core)
so that size is small enough to load it into FiraDisk RAMDISK and boot from it.
When booting as VHD FILEDISK then changes are permanent e.g. extra installed small programs and drivers
Windows 8 adjust easily to any hardware and is in this respect far better than any other Windows.
The built in DriverStore is very complete and the power to make use of it is impressive.
Posted 17 December 2013 - 07:39 AM
Posted 21 December 2013 - 05:00 AM
Hi WimB
Please clarify a doubt about RAMDISK boot method. If i create a 3.5 GB x64 VHD, how much system RAM i need to boot it via RAMDISK method ?. Since the VHD is 3.5 GB in size, am i only able to boot it in systems with 4 GB or more RAM ?.
Posted 21 December 2013 - 07:06 AM
You need to keep 1 GB of free RAM so if you have only 4 GB
then it is better to make the Mini 8 in 3 GB VHD as described above.
I think the 3.5 GB VHD will need systems having more than 4 GB RAM for booting as RAMDISK
Posted 13 January 2014 - 03:08 PM
Does Task Scheduler work with Win8 Portable ? I think you had mentioned something, can't find it.
I need to run a cmd file at start-up as admin mode - specifically the file StartOverride_IDE_AHCI.cmd from :
http://reboot.pro/to...ng/#entry181384
Or if not Task scheduler, do you know anyother way ?
EDIT
The method mentioned here works :
http://arktronic.com...windows-startup
StartOverride_IDE_AHCI.vbs
Set UAC = CreateObject("Shell.Application") UAC.ShellExecute "C:\Program Files\StartOverride_IDE_AHCI.cmd", "", "", "runas", 1
Posted 03 February 2014 - 02:46 PM
Hello,
thx for that tool, but i've got one bigger problem. I created some mini 8 vhds, but i'm not able to run easybcd on the created systems. It tells me to install Net.Framework, even if i chose to install it in the tool. Is there a workaround for this problem or am i the only one with that prob?
Posted 03 February 2014 - 03:04 PM
@kowski
You can better use the small, standalone bootice utility which has a full BCD edit function:
http://reboot.pro/to...-v078-released/
Posted 03 February 2014 - 03:15 PM
http://bbs.ipauly.co...06e07ab6f3b01cb
Latest version of Bootice v1.3.2.1 is here
Use BCD Edit - Professional mode
For EasyBCD it depends probably on the version.
I think that the in IMG_XP package provided version EasyBCD 2.1.2.exe in IMG_XP\makebt folder
is working in Mini Win 8 VHD having .Net Framework enabled.
Posted 03 February 2014 - 03:31 PM
THX for your answers, but that's not the solution for the problem. It's just another tool. I'd like to know, why tools like Easybcd and ireboot, that require Net.Framework don't work. It looks like the Frameworkintegration doesn't work properly, so you can remove it from the tool, because i tried and tried and tried...it would be nice to refer to this problem, so other people won't waste their time, like i did. I like the tool very much...don't misunderstand me, please.
Posted 03 February 2014 - 03:39 PM
The point is that VHD size reduction is desired so that booting from RAMDISK can be used.
Full support of .NET Framework takes too much space.
So the compromise is to give some .NET Framework support just enough for simple apps.
The consequence is that not all versions of EasyBCD can be used, but I think the given one is working.
Hope you understand the approach being followed ....
It is better to Install EasyBCD in Win 8 Source and test if it is working there.
Then the chance is much better that it will work in Mini 8 VHD made with .NET Framework enabled.
Posted 04 February 2014 - 06:38 AM
Easy BCD 2.1.2 running in Portable Windows 8.1 VHD Size 2.5 GB
1. Install EasyBCD 2.1.2.exe in fresh installed Windows 8.1 Source
2. Reboot with other Win 7/8/7PE OS
3. modify file nf20_8vhd.txt in folder\VHD_W8C\VHD_W8 so that your EasyBCD folder will be copied
4. Run VHD_W8_Compact.exe and have .NET Framework Selected and make Portable Win 8.1 VHD
nf20_8vhd.txt in folder \VHD_W8C\VHD_W8
; adjust to your needs; EasyBCD 2.1.2is added via nf20_8vhd.txt since it requires .NET 2.0\Program Files\EasyBCD\*.*\Program Files (x86)\EasyBCD\*.*
Conclusion:
Easy BCD 2.1.2 requires .NET Framework 2.0 which is not part of Windows 8.
You need to Install Easy BCD in the fresh installed Windows 8 Source.
In that case .NET Framework 2.0 is easily installed,
whereas install of .NET Framework 2.0 in Mini Win 8 does not work and
also such way of install would lead to unwanted size increase .....
Posted 04 February 2014 - 01:51 PM
Posted 05 February 2014 - 10:21 AM
-*** Update VHD_W8C_82 ***Download - VHD_W8C_82 - mirrorIn the same way Updated:IMG_XP.exe - IMG_XPVHD_W7C_80.exe - http://reboot.pro/fi...ct-make-mini-7/Win_Restore_81.exe - http://reboot.pro/fi...-on-hdd-or-usb/
Making of the EFI Boot Manager Menu required still some improvement.
Please download the Updated versions.
Sorry for the inconvenence ....
Posted 09 February 2014 - 07:30 PM
Hello,
thx for that tool, but i've got one bigger problem. I created some mini 8 vhds, but i'm not able to run easybcd on the created systems. It tells me to install Net.Framework, even if i chose to install it in the tool. Is there a workaround for this problem or am i the only one with that prob?
EasyBCD 2.2 requires to install in Win 8.1 Source and to Select .NET Frame 4.0 when making Portable Win8 VHD of Size 3 GB
; adjust to your needs; EasyBCD 2.2 is added via nf40_8vhd.txt since it requires .NET 4.0\Program Files\EasyBCD\*.*\Program Files (x86)\EasyBCD\*.*
Posted 09 February 2014 - 07:46 PM
Run easybcd from a Windows system and load the BCD store from the mounted vhd.
Posted 15 February 2014 - 09:13 AM
Posted 22 February 2014 - 05:52 PM
Posted 01 March 2014 - 11:12 PM
VHD can't works with FbinstTool But winpe It works
Posted 02 September 2014 - 07:03 PM
blue screen system config error
Posted 24 September 2014 - 10:06 PM
wimb,
I have installed windows 8 x64 in a VM (firmware=EFI) and converted the vmx file (and accompanied vmxd file) to a vhd. This is what I used as my source VHD. I have selected my user directory after the VHD mounts and I'm prompted by VW8C to do so. I can mount and run this vhd fine in vmplayer.
After hitting the GO button VW8C starts fine and I select the user directory from the mounted VHD. Unfortunately I error out at create target VHD:
STOP - Error DiskPart
Create Dest VHD - DiskPart Error = -2147024809
Screenshot attached:
https://www.dropbox....r_Exit.JPG?dl=0
Can you help me?
Thanks,
Victor
Posted 25 September 2014 - 05:34 AM
What OS do you use for running VHD_W8_Compact.exe ?
Does your OS in Windows Disk Management support to Create VHD ? (Home8x64 does not support to make VHD)
Download 8.1 Enterprise Evaluation x64 from - http://www.microsoft...-8-1-enterprise
Try the original approach - http://reboot.pro/to...ct-make-mini-8/
Boot methods & tools →
Boot from USB / Boot anywhere →
VHD_Compact - Repair and Install of Windows 10/11 x64Started by wimb , 15 Mar 2024 winntsetup, windows to go and 2 more... |
|
|
||
winntsetup
Boot methods & tools →
Boot from USB / Boot anywhere →
I can't boot Windows installed into a VHD using WinNTSetupStarted by pioj , 10 Feb 2024 winntsetup, vhd, ventoy |
|
|
||
Boot methods & tools →
Boot from USB / Boot anywhere →
USBDualPartStarted by rradjab , 14 Jun 2023 dualpart, usb dual part and 7 more... |
|
|
||
Groups →
Project forge →
VHD to fixed driveStarted by alacran , 16 Aug 2022 vhd, vhd mounter |
|
|
||
Groups →
Community forum →
Requests →
RE:hiow to manually install ventoy efi boot manager files on usb driveStarted by Borg0Bot22 , 23 Jul 2022 uefi, usb, ventoy |
|
|
0 members, 0 guests, 0 anonymous users