#26
Posted 24 January 2012 - 08:46 AM
Thanks for your quick response and detailed instructions. You rock.
I think I get it now (finally). The basic idea is to:
1) mount the make_pe3 boot.wim file
2) load the SYSTEM and SOFTWARE registry hives from the make_pe3 boot.wim file as PE3-SYSTEM and PE3-SOFTWARE
3) use SetACL.exe (your AutoIt code or manually with SetACL.exe) to take ownership and grant full access of the two above hives
4) run a winbuilder build with the PPPOE script (from Oscar's post) added while using the make _pe3 boot.wim (with ownership and access established for the PE3_SYSTEM and PE3_SOFTWARE hives set) as the Windows source for my Winbuilder build.
...and the driver_fix.cmd is used to load the PPPOE drivers and start the service so that PPPOE is loaded and active.
Thank you SO much for your help. Assuming I understand correctly this will be more than enough to help me get started.
Much appreciated Wimb!!
Next question: how do I email you a beer to say thanks? :-)
#27
Posted 24 January 2012 - 12:48 PM
i have good news. my "Dialup PPOE script" is ready for Win7PE.
Kare
--
#28
Posted 24 January 2012 - 01:00 PM
I am not sure if the syntax is correct or if it makes sense, but with setacl or wihout it I always get the error 797
[Main]
Title=SEAKS Telephony
Selected=False
Level=5
Author=0scar
Version=000
Date
[Process]
RegHiveLoad,Tmp_Software,%RegSoftware%
//Echo,"Take Ownership of PE software hive, be patient..."
//ShellExecute,Hide,%Tools%%OSArch%SetAcl.exe,"-on #$qHKLMTmp_software#$q -ot reg -rec yes -actn setowner -ownr #$qn:S-1-5-32-544;s:y#$q"
//Echo,"Grant full access to PE Software hive, be patient..."
//ShellExecute,Hide,%Tools%%OSArch%SetAcl.exe,"-on #$qHKLMTmp_software#$q -ot reg -rec yes -actn ace -ace #$qn:S-1-5-32-544;p:full;s:y#$q"
Now, I can see that :S-1-5-32-544;s: probably it should be S-1-1-0;s
Edited by 0scar, 24 January 2012 - 01:35 PM.
#29
Posted 24 January 2012 - 02:58 PM
Wow that was fast! Where can it be found?i have good news. my "Dialup PPOE script" is ready for Win7PE.
#30
Posted 24 January 2012 - 03:43 PM
This is a working "plugin" for pppoe, ADSL and old telephone modem internet service:
http://www.mediafire...rvov854gk1tm3ov
But it has a drawback, the plugin needs a boot.wim extracted from a Wimb's 7pe_x86_E.iso.
I use the windows folder only, and it is better to delete *.cmd, and *.reg files from system32. The other folders are from the normal boot.wim
If a normal boot.wim is used I always get the error 797 (modem no found, modem removed, etc.)
Seakz , at the 911Cd forum make_PE3 thread, explains why the error and gives the solution but I could not implement it for winbuilder.
Anyway, you may tray using a normal boot.wim and enabling the scripts that are in the plugin 4testing folder, which are scripts translated from make_PE3 project .reg files.
Tested for x86 and Ultimate.
No more drawbacks, now works with normal boot.wim:
http://www.mediafire...0v965f962gdtd2j
The plugin has four scripts and a files folder.
I know that one script is a bit redundant, it copies again some required files. Probably the phones rules script is unnecessary.
Of course, the four scripts may be unified and the files folder (Bartpe legacy) might disappear inside the script in order to make the whole thing more unreadable.
Edited by 0scar, 24 January 2012 - 03:46 PM.
#31
Posted 24 January 2012 - 04:17 PM
Builder:
http://www.kare-net....stempro-beta.7z
Script:
http://www.kare-net.de/download/DialupPE-Win7.7z
Kare
--
#32
Posted 24 January 2012 - 04:39 PM
When i download the archive, marked as containing the script, then i find no script in it.
#33
Posted 24 January 2012 - 05:27 PM
Edited by raptor7, 24 January 2012 - 05:28 PM.
#34
Posted 24 January 2012 - 05:32 PM
#35
Posted 24 January 2012 - 05:48 PM
#36
Posted 24 January 2012 - 06:24 PM
What can i say? When i hear "script" i think "Winbuilder".
#37
Posted 24 January 2012 - 07:19 PM
#38
Posted 24 January 2012 - 08:24 PM
#39
Posted 24 January 2012 - 08:36 PM
http://www.911cd.net...ndpost&p=165840
Netrasa.inf gives error 70002 because it can not find the file rasirda.sys. It seems that this driver does not exists for Win 7
Create zero-length txt file. Rename to rasirda.sys. Put it in PE3_modPE3_add...windowsinf
error will be gone
with dummy rasirda.sys you even can reinstall faulty WAN miniports in Win 7 from device manager
#40
Posted 24 January 2012 - 08:45 PM
#41
Posted 24 January 2012 - 11:46 PM
You use twice %target-_win% instead of %target_win%.
#42
Posted 25 January 2012 - 12:43 AM
Edited by 0scar, 25 January 2012 - 12:44 AM.
#43
Posted 25 January 2012 - 01:07 AM
DirCopy,"%InstallSRC%\Windows\inf\TAPISRV","%target-_win%\inf"
DirCopy,"%InstallSRC%\Windows\Microsoft.Net","%target-_win%"
#44
Posted 25 January 2012 - 01:36 AM
DirCopy,"%InstallSRC%WindowsinfTAPISRV","%target_win%inf"
DirCopy,"%InstallSRC%WindowsMicrosoft.Net","%target_win%"
I think it may be problem of the unzipping tool or the editor.
#45
Posted 25 January 2012 - 04:59 PM
#46
Posted 26 January 2012 - 02:07 AM
@all
Can anyone report success with Oscars plugin for ADSL or MODEM?
I have problems to find a computer that can handle Win7 and still has a serial port for a MODEM. Also my ADSL test wasn't successful. Win7PE_SE hangs during install of my USB-DSL-MODEM.
#47
Posted 26 January 2012 - 02:12 AM
\windows\inf\tapisrv\*.*
//modem
Require_File,cmcfg32.dll
Require_File,cmdial32.dll
Require_File,cmlua.dll
Require_File,cmncliM.dll
Require_File,cmpbk32.dll
Require_File,cmstplua.dll
Require_File,CmUCRRm.dll
Require_File,cmutil.dll
Require_File,en-Us\cmcfg32.dll.mui
Require_File,drivers\modem.sys
Require_File,drivers\en-Us\modem.sys.mui
Require_File,serialui.dll
Require_File,en-Us\serialui.dll.mui
\windows\inf\tapisrv\*.*
Require_File,tapi3.dll
Require_File,en-Us\tapi3.dll.mui
Require_File,umdmxfrm.dll
Require_File,unimdmat.dll
Require_File,en-Us\unimdmat.dll.mui
// Additional files required only for “WIN7_add_explor.txt”
#48
Posted 26 January 2012 - 06:14 AM
http://www.mediafire...z32s720hle83b8i
Now I have seen the mysterious "%target-_win%inf", I am beginning to suspect o
A copy of the downloaded plugin should be saved and compared after running winbuilder with the original.
The plugin is working nice with an old US Robotics pci 56k phone modem.
Unfortunately I cannot test it with an ADSL modem.
Edited by 0scar, 26 January 2012 - 06:31 AM.
#49
Posted 26 January 2012 - 08:17 AM
Meanwhile, can you or wimb tell me, which MODEMs are suppose to work with this plugin.
- analog MODEM
- ADSL MODEM
- GSM / GPRS / 3G MODEM (over cable)
- GSM / GPRS / 3G Modem (over irda)
- GSM / GPRS / 3G Modem (over bluetooth)
Also, is there a reason, why this plugin starts wireless services? Havn't heared about a MODEM connected by wireless.
#50
Posted 26 January 2012 - 10:15 AM
Working just fine here with Huawei E220 (wireless dialup @ usb)
Using these drivers:
http://al-jo.99k.org/Huaweidrivers.7z
Also tagged with one or more of these keywords: win7pe, pppoe
Boot methods & tools →
WinBuilder →
Support →
The Problem Win7PE SE + Please HelpStarted by mehrantelikani , 14 Jul 2015 win7pe |
|
|
||
Boot methods & tools →
WinBuilder →
Win8PE →
MMC.script modificationStarted by era4sure , 02 Dec 2014 mmc, win8pe, win7pe, scripts and 2 more... |
|
|
||
Boot methods & tools →
WinBuilder →
Win7PE →
MMC.script modificationStarted by era4sure , 02 Dec 2014 mmc, win8pe, win7pe, scripts and 2 more... |
|
|
||
Boot methods & tools →
WinBuilder →
Win7PE →
Is it possible to Script specific disk filter drivers?Started by tblo , 14 Sep 2014 e2b, easy2boot, pe3, win7pe |
|
|
||
Boot methods & tools →
WinBuilder →
Win7PE →
PGP Recovery in Win7PEStarted by KP13 , 27 Feb 2014 pgp, win7pe, pgp recovery |
|
|
0 user(s) are reading this topic
0 members, 0 guests, 0 anonymous users