[script]PENetwork
#26
Posted 27 January 2007 - 11:41 AM
I think phox means the problem (I couldn't see before cause I use VMWare here) with QEMU:
i f the network is started and you click 'OK' then the changes (also if there were no) are written to the system back and then you got no more IP-address.
Holger
Edit: phox, this seems to be 50% problem with QEMU cause I get the same with BartPE or WinPE.
This first time I get an ipaddress but after releasing and renewing there is no contact anymore to the DHCP-server.
So I will correct just my bug, if there are no changes on the settings - there will be not written changes to the system.
For now after network initialization you have to click "Cancel" in the GUI.
Edit2: seems to work now, still small problem with computer renaming.
New version should be online lately tomorrow, for now I have no time - my new memory is there upgrading now to 2GB - yes, then VirtualComputing is much more funny (than only with 512)
#27
Posted 27 January 2007 - 08:34 PM
I have a experience with netshell.dll not found and TCP/IP error. I tested with WB063 version today.@Holger
,,,,
But I tested with penetcfg.exe + bartpe.exe ,,,,,,, TCP/IP error is appeared, so I think it is not a bug in your script.
netshell.dll is needed for network and you can add in your script.
Thanks for your time and hard work.
yahooUK
#28
Posted 28 January 2007 - 12:37 PM
So I need a file with special characters in it.
Not more needed (after 3times of asking), I'll take a look now at MP3Gain how it handles with languages...
Thanks and greets
Holger
#29
Posted 30 January 2007 - 07:23 PM
Thanks again for testing and bug reporting
I'm just working on some adds/changes again (cmdline parameter for gui-showing, starting, etc., simple network drive adding).
Greets
Holger
#30
Posted 30 January 2007 - 07:39 PM
Thanks, nice work!Updated - see first post
Thanks again for testing and bug reporting
I'm just working on some adds/changes again (cmdline parameter for gui-showing, starting, etc., simple network drive adding).
Greets
Holger
Do you think a send it to tray function would be possible? This way it would feel a little bit more like home.
#31
Posted 30 January 2007 - 07:46 PM
Updated - see first post
Thanks again for testing and bug reporting
I'm just working on some adds/changes again (cmdline parameter for gui-showing, starting, etc., simple network drive adding).
Greets
Holger
Tested in qEmu:
The 'OK' bug is gone
One small wish:
If I decide to start the pnp detection and net during boot time, then the message box asking for that should not appear.
Peter
#33
Posted 30 January 2007 - 08:06 PM
I dont know but when Pe Network manager runs it process like it recognizes things and is sets things up. but once its loaded there is no Network Card present. Is networking working for everyone with the new LiveXP in Winbuilder067
Are you sure to have the "Qemu Network Driver" activated?
Peter
#34
Posted 30 January 2007 - 08:08 PM
Two requests:
To replace "Do you wanna start it now?" with "Start network services?"
And replace "protocoll" with "protocol"
I also get the same output as TheHive under LiveXP - no network card is detected altought the script is enabled..
When the main window comes up, is it possible to already have selected the "Obtain an IP adress automatically"
Last but not least, I've found some nice free icon images to place on your program if you wish:
http://www.famfamfam...lab/icons/silk/
Some look really good, hope you like them.
#35
Posted 30 January 2007 - 08:20 PM
-> Autostarting for now means, automatically starts "PENetwork"
@Hive: no idea - like Peter maybe said-missing network driver, will make some tests without any network cards.
Normally there should be a message that there no network cards could be detected.
Can you please take a look to the key:
HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion\NetworkCards
@Nuno: No thisone you could later change by your own language file.
Hmmm...the icons are OK, however, I did some work in my own icons so I will let them like they are
Maybe I will optional put some parameters into the settings-ini to use maybe icons of another exe or icl-file.
Ok, will do some tests again unter WB067...
Greets
Holger
#36
Posted 30 January 2007 - 08:22 PM
I dont know but when Pe Network manager runs it process like it recognizes things and is sets things up. but once its loaded there is no Network Card present. Is networking working for everyone with the new LiveXP in Winbuilder067
When in my LiveXP project I activate all drivers and all apps, then I have the same result.
My opinion: Holger's program seems to work correctly, but any of the all's does something strange in the PE.
Peter
#37
Posted 30 January 2007 - 08:34 PM
@Nuno again: "protocoll" - I see - thanks for info
#38
Posted 30 January 2007 - 08:44 PM
#39
Posted 30 January 2007 - 10:18 PM
Will now check what the problem is - some dll's which are used can be problem (like i.e. sfc_os.dll - for what is this needed? - SystemRestore? )
Edit: interesting problem: cause of some dll's or something from the Go2PDF-script "the install process" cannot find the driver-files:
- "startnet" returns 0x2 -> ERROR_FILE_NOT_FOUND.
From WDDK: "...The path specified for FullInfPath does not exist."
"FullInfPath
A caller-supplied full path to an INF file and any associated driver files. The files should be on the distribution media or in a vendor-created directory, not in a system location such as %windir%\inf. The function copies driver files to the appropriate system locations if the installation is successful."
You can see the result if just quitting network detection and run from cmd:
startnet -pnp
#40
Posted 30 January 2007 - 10:55 PM
I've tried the default values, but how should I use to get it working under qemu?
Thanks!
#41
Posted 30 January 2007 - 11:04 PM
Do you mean how to use then the "Go2PDF"-printer?
However, the problem is not the used DLL's but the used internal: go2pdf_inst.reg
In this, the value for "SystemSetupInProgress" is set to "0x0" which causes the problem/kills my hardware detection.
Maybe someone can me explain why this value is set to 0x0?
So long and thanks
Holger
#42
Posted 30 January 2007 - 11:17 PM
Seems, that printing is not allowed in "setup-running-mode"
So new update is near
#43
Posted 31 January 2007 - 12:38 AM
- fast bugfix release
#45
Posted 31 January 2007 - 01:03 PM
Version 4 looks
TheHive, Holger: I've disabled the go2pdf script and the NIC is recognized as supposed, used automatic settings on PE network config but was still unable to connect onto the internet after this. Off by One gives no sign of google either..
I'm using Qemu and am quite sure that my network is working correctly on the host machine, Is there any other step needed for this? Any ip adress to ping for testing?
ping on 10.0.2.2 and 10.0.2.3 gives "Destination specified is invalid" and only replies sucessfuly from myself at 10.0.2.15 - this was done testing the internal ping function.
Using ping from command line after pressing ok and leaving PE network config application, both 10.0.2.2 and 10.0.2.15 ping just fine, only 10.0.2.3 fails..
Sorry for all these questions, never really had needed to set up network support under qemu before..
#46
Posted 31 January 2007 - 02:53 PM
#48
Posted 31 January 2007 - 03:42 PM
#50
Posted 31 January 2007 - 04:37 PM
I checked a little bit more: Great work until now
You should rename the title from 'PreBeta' to 'LateBeta'
Peter
0 user(s) are reading this topic
0 members, 0 guests, 0 anonymous users