MultiPE Leopard v2 - Requests
#1
Posted 17 November 2010 - 07:28 PM
#2
Posted 20 November 2010 - 06:59 AM
thanks
#3
Posted 20 November 2010 - 09:02 AM
can you add perfectdisk 11?
thanks
Hi ashley7
Welcome to boot-land-net. I am currently busy with the project. I will do its script to the first opportunity Best regards
#4
Posted 20 November 2010 - 01:35 PM
#5
Posted 20 November 2010 - 01:53 PM
been absent for a while.... Wow Max, glad to see your work progress! I'll start to test MPL sp3... in the meanwhile, why not add bitlocker capabilities to MPL v2?
Hi sgufa
I'm glad to see you again. I will wait your valuable feedback. I do not know about bitlocker. So i need someone to help me for this subject. Best regards
#7
Posted 23 November 2010 - 08:24 AM
why after press CTRL+C start" Command Prompt"??
How can I disable?
Is it possible to check wheel on mouse I can move down in notepad but not up.
Wheel on command prompt go to bottom of windows.
Thank you
#8
Posted 23 November 2010 - 09:53 AM
please change line 313 of Standard-7-iso-usb-hdd.script to:
FileCreateBlank,"%BootMenu%"
It will fix same lines if you run Standard-7-iso-usb-hdd.script more times without delete Target dir.
Please chanage default letter for RAM disk to another letter then Z: because this letter use vmware for sharing folders.
Thank you
#9
Posted 23 November 2010 - 05:12 PM
Is there something that you want it to be in project ?
Driver Integrator . Really need one that integrate the drivers into kernel from unlimited level of sub folders. Currently the extra drivers loaded by PELoader which not always work as desired and take too long to load and the boot.wim is too big.
The driverpacks.net package are way too old, missing the lates chipset ang storage support, and those driver really need to load before PE starts.
I am not very clear how the PEgetting builds. I imagine, the driver could get injected just after install.wim/boot.wim mounted before the PE base folder/files got built. I guess the drivers get copied from bootSRC or InstallSRC by scanning Windows/inf folder???
#10
Posted 23 November 2010 - 05:21 PM
for /r "DriversFolder" %%a in (*.inf) do %Tools%\peimg.exe /inf=%%a %Target_Sys%\Windows
Will it be right?
#11
Posted 23 November 2010 - 08:27 PM
Hi Max,
why after press CTRL+C start" Command Prompt"??
How can I disable?
Is it possible to check wheel on mouse I can move down in notepad but not up.
Wheel on command prompt go to bottom of windows.
Thank you
Hi my friend Filip Hasa
23.11.png 116.09KB 82 downloads
Is it possible to check wheel on mouse I can move down in notepad but not up.
Wheel on command prompt go to bottom of windows.
imagesCA1GD1D3.jpg 3.18KB 23 downloads
My mouse's whell on feature is working on the Vmware with notepad (Win7 x86 Project)
But:
http://technet.micro...y/cc959542.aspx
[SetupReg.AddReg] Echo,"Loading registry hive: [setupreg.hiv]" Hive_Load,HKLM Echo,"Writing new values on registry hive.." reg_add,0x4,"%reg%\ControlSet001\services\i8042prt\Parameters","EnableWheelDetection","2" Hive_Unload,HKLM
OR:
WizMouse.7z 480KB 7 downloads
I will wait for your feedback. Best regards
#12
Posted 23 November 2010 - 08:35 PM
Driver Integrator . Really need one that integrate the drivers into kernel from unlimited level of sub folders. Currently the extra drivers loaded by PELoader which not always work as desired and take too long to load and the boot.wim is too big.
The driverpacks.net package are way too old, missing the lates chipset ang storage support, and those driver really need to load before PE starts.
I am not very clear how the PEgetting builds. I imagine, the driver could get injected just after install.wim/boot.wim mounted before the PE base folder/files got built. I guess the drivers get copied from bootSRC or InstallSRC by scanning Windows/inf folder???
Hi oopsboy
This is possible with this script. Only select the directory that contains your drivers. Best regards
23.111.png 112.66KB 47 downloads
#13
Posted 23 November 2010 - 09:03 PM
Please chanage default letter for RAM disk to another letter then Z: because this letter use vmware for sharing folders.
please change line 313 of Standard-7-iso-usb-hdd.script to:
FileCreateBlank,"%BootMenu%"
It will fix same lines if you run Standard-7-iso-usb-hdd.script more times without delete Target dir.
Okay I'm thank you very much Filip for your valuable feedback. Best regards
#14
Posted 24 November 2010 - 01:07 PM
Hi oopsboy
This is possible with this script. Only select the directory that contains your drivers. Best regards
23.111.png 112.66KB 47 downloads
Thanks, was different version of script last week, I download/updated the project, now shows up.
#15
Posted 24 November 2010 - 02:00 PM
how about "Driver Integrator" for online(offline) image of windows?
Idea: add new tab "drivers" to vpeldr
there will be which online image of windows you want update
and where is drivers
command: dism.exe /online:d: /add-drivers /driver:x:\windows\sysmte32\inf
d: can be found be cmd:bootrec /scanos
x:\windows\sysmte32\inf = if you can see disk you has have driver in this dir
2nd idea is add boot fix commands:
bootrec /fixmbr
bootrec /scanos
bootrec /fixboot
bootrec /RebuildBcd
bcdedit /set {default} detecthal on
copy y:\bootmgr c:\
c: is active partition
3rd idea fix all disk storage services:
reg load HKLM\systemdst D:\Windows\System32\config\SYSTEM
start /wait StorageBootStart.bat
reg unload HKLM\systemdst
StorageBootStart.bat you will find at dropbox
source of this is our community
Is it clearly explained?
Thank you
#17
Posted 26 November 2010 - 06:33 AM
Would like to running different programs at different stage. It would be preferable to have serial "events" when PELoader is running, so customization would be possible, a event would customized to trigger external program(s) start to run.
#18
Posted 04 December 2010 - 02:17 PM
Hi Max,
how about "Driver Integrator" for online(offline) image of windows?
Idea: add new tab "drivers" to vpeldr
there will be which online image of windows you want update
and where is drivers
command: dism.exe /online:d: /add-drivers /driver:x:\windows\sysmte32\inf
d: can be found be cmd:bootrec /scanos
x:\windows\sysmte32\inf = if you can see disk you has have driver in this dir
2nd idea is add boot fix commands:
bootrec /fixmbr
bootrec /scanos
bootrec /fixboot
bootrec /RebuildBcd
bcdedit /set {default} detecthal on
copy y:\bootmgr c:\
c: is active partition
3rd idea fix all disk storage services:
reg load HKLM\systemdst D:\Windows\System32\config\SYSTEM
start /wait StorageBootStart.bat
reg unload HKLM\systemdst
StorageBootStart.bat you will find at dropbox
source of this is our community
Is it clearly explained?
Thank you
Hi my friend
2nd idea is add boot fix commands:
bootrec /fixmbr
bootrec /scanos
bootrec /fixboot
bootrec /RebuildBcd
bcdedit /set {default} detecthal on
copy y:\bootmgr c:\
c: is active partition
I think may be useful in this feature of the vpeldr.exe . In addition, this file (bootrec.exe) is only available in Vista.
04.12.png 31.73KB 27 downloads
3rd idea fix all disk storage services:
reg load HKLM\systemdst D:\Windows\System32\config\SYSTEM
start /wait StorageBootStart.bat
reg unload HKLM\systemdst
StorageBootStart.bat you will find at dropbox
source of this is our community
Is it clearly explained?
Superb idea and share
The Win7PE is working with the normal mode in the External USB HDD now. No longer, projects not need more physical memory.
I'm thank you very much Filip Hasa for superb tip
Best regards
04.12_1.png 123.03KB 28 downloads
#19
Posted 04 December 2010 - 02:25 PM
More Control of PELOader.
Would like to running different programs at different stage. It would be preferable to have serial "events" when PELoader is running, so customization would be possible, a event would customized to trigger external program(s) start to run.
Hi 'oopsboy
I understand very well what you mean. I'll do a study on this issue. But you can use this feature of the vpeldr for the time being. Best regards
04.12_3.png 30.35KB 26 downloads
#20
Posted 04 December 2010 - 08:20 PM
I don't agree. I found bootrec.exe in boot.wim image on Windows 7 DVD (\Windows\System32\BootRec.exe)I think may be useful in this feature of the vpeldr.exe . In addition, this file (bootrec.exe) is only available in Vista.
I am glad I can inform you about this.I'm thank you very much Filip Hasa for superb tip
Filip
#21
Posted 04 December 2010 - 10:02 PM
I don't agree. I found bootrec.exe in boot.wim image on Windows 7 DVD (\Windows\System32\BootRec.exe)
I am glad I can inform you about this.
Filip
Hi my friend
Opps pardon This file is at the boot.wim but there is no winpe.wim . I will add your idea to the vpeldr. Best regards
Edit: I will upload it to the DropBox later.
05.12.png 41.68KB 21 downloads
#22
Posted 04 December 2010 - 10:05 PM
Hi 'oopsboy
I understand very well what you mean. I'll do a study on this issue. But you can use this feature of the vpeldr for the time being. Best regards
04.12_3.png 30.35KB 26 downloads
Coming soon
04.12_4.png 380.12KB 28 downloads
#23
Posted 05 December 2010 - 09:10 PM
I will add your idea to the vpeldr.
Is it only part with boot fix? bootrec and so on?
Thank you
#24
Posted 05 December 2010 - 09:59 PM
Hi Max,
Is it only part with boot fix? bootrec and so on?
Thank you
Hi my friend Filip Hasa I did exactly as such. Best regards
Case $MSG_MAIN[0] = $MENU_BootFix If $MODE = "VistaPE" Then If NOT (FileExists (@SystemDir & "\bootrec.exe")) Then MsgBox (16, "Error!", "BootRec.exe not found !") Return EndIf SplashTextOn("BootRec", "BootFix being processed !", 210, 50, -1, -1, 4, "", 1) RunWait(@ComSpec & " /c " & 'bootrec /fixmbr', "", @SW_HIDE) RunWait(@ComSpec & " /c " & 'bootrec /scanos', "", @SW_HIDE) RunWait(@ComSpec & " /c " & 'bootrec /fixboot', "", @SW_HIDE) RunWait(@ComSpec & " /c " & 'bootrec /RebuildBcd', "", @SW_HIDE) RunWait(@ComSpec & " /c " & 'bcdedit /store "C:\Boot\bcd" /set {default} detecthal on', "", @SW_HIDE) If NOT (FileExists ("C:\bootmgr")) Then If FileExists (@HomeDrive & "\bootlnd") Then FileCopy (@HomeDrive & "\bootlnd", "C:\bootmgr") Else $EDDL = IniRead ("X:\Windows\System32\multipe.cfg", "main", "EDDL", "") If FileExists ($EDDL & "\bootmgr") Then FileCopy ($EDDL & "\bootmgr", "C:\bootmgr") EndIf EndIf SplashOff() Else MsgBox (64, "Caution!", "This feature is only working with " & $MultiPE & "!") EndIf
#25
Posted 05 December 2010 - 10:55 PM
on command "bootrec /RebuildBcd" you need answer from user ;o(
Thank you
0 user(s) are reading this topic
0 members, 0 guests, 0 anonymous users