- veersion 0.1
- -add a virtualdisk by selecting a raw image file (hardcoded : offset=0, id=0, bytes/sector=512)
- -remove the virtualdisk #0
- -check if the arsenal driver is installed
- -query the arsenal drive #0 to retrieve the id and filename of the virtualdisk
- version 0.2
- -can add more than one virtualdisk
- -will remove all virtualdisks
- -will list all virtualdisks
- -install the (storport only) driver using devcon (NOT included in the package)
- -check if the driver is installed
- version 0.3
- -handles the xp installation : will add the driver and start the service
- -for win7 (and up) installation : will use devcon if existing in the folder or will advise to use the "add legacy hardware" wizzard
- -when pointing to a non existing img file, the app will then ask for the size of the new virtualdisk and will create the imagefile,
- so one can create a virtualdisk from an existing raw image or create the raw image on the fly.
- version 0.4
- -cosmetic work
- version 0.5
- -Can now make a virtualdisk out of memory.
- It does not use awealloc for now.
- I could make it an option if needed.
- version 0.6
- -after a memory drive is created, the app will propose to initialise the drive (i.e createdisk+createpartition).
- After this, windows will propose to format it.
- -The interface also displays the mathing physicaldrive using IOCTL_SCSI_GET_ADDRESS
- -new program icon.
- version 0.7
- -new name : imgmount
- -When clicking add (file) icon, user can choose 'add existing' or 'new'
- -When clicking memory icon, user can choose 'add existing' (from file) or 'new'
- -When adding a new file, ImgMount will also initialize the disk (and will still for now rely on windows wizard to format it)
- version 0.8
- -Now supports physical memory usage (vs virtual memory) thru awealloc.
- version 0.9
- -added an uninstall option (no reboot needed for win7 and up)
- -have updated XP driver with inf file from Bilou_Gateux
- -install and uninstall now both use devcon.exe from MS
- version 1.0
- -support sharedmemory proxy thru devio
- ->devio shm:disk \\.\PhysicalDriveX 0 0 or devio shm:disk c:\disk.img 0 0
- version 1.1
- -For Driver Install then in FileSelector limit the filetypes to *.inf
- -For Add File Disk then in FileSelector limit the filetypes to supported types e.g. *.vhd *.img and some more
- -possibility to use ms virtualdisk api to load (any) vhd (disks will be unmounted for now when the application close)
- version 1.2
- -can dump/save a physicaldrive to an image file (useful for memory disk)
|
- veersion 0.1
- -add a virtualdisk by selecting a raw image file (hardcoded : offset=0, id=0, bytes/sector=512)
- -remove the virtualdisk #0
- -check if the arsenal driver is installed
- -query the arsenal drive #0 to retrieve the id and filename of the virtualdisk
- version 0.2
- -can add more than one virtualdisk
- -will remove all virtualdisks
- -will list all virtualdisks
- -install the (storport only) driver using devcon (NOT included in the package)
- -check if the driver is installed
- version 0.3
- -handles the xp installation : will add the driver and start the service
- -for win7 (and up) installation : will use devcon if existing in the folder or will advise to use the "add legacy hardware" wizzard
- -when pointing to a non existing img file, the app will then ask for the size of the new virtualdisk and will create the imagefile,
- so one can create a virtualdisk from an existing raw image or create the raw image on the fly.
- version 0.4
- -cosmetic work
- version 0.5
- -Can now make a virtualdisk out of memory.
- It does not use awealloc for now.
- I could make it an option if needed.
- version 0.6
- -after a memory drive is created, the app will propose to initialise the drive (i.e createdisk+createpartition).
- After this, windows will propose to format it.
- -The interface also displays the mathing physicaldrive using IOCTL_SCSI_GET_ADDRESS
- -new program icon.
- version 0.7
- -new name : imgmount
- -When clicking add (file) icon, user can choose 'add existing' or 'new'
- -When clicking memory icon, user can choose 'add existing' (from file) or 'new'
- -When adding a new file, ImgMount will also initialize the disk (and will still for now rely on windows wizard to format it)
- version 0.8
- -Now supports physical memory usage (vs virtual memory) thru awealloc.
- version 0.9
- -added an uninstall option (no reboot needed for win7 and up)
- -have updated XP driver with inf file from Bilou_Gateux
- -install and uninstall now both use devcon.exe from MS
- version 1.0
- -support sharedmemory proxy thru devio
- ->devio shm:disk \\.\PhysicalDriveX 0 0 or devio shm:disk c:\disk.img 0 0
- version 1.1
- -For Driver Install then in FileSelector limit the filetypes to *.inf
- -For Add File Disk then in FileSelector limit the filetypes to supported types e.g. *.vhd *.img and some more
- -possibility to use ms virtualdisk api to load (any) vhd (disks will be unmounted for now when the application close)
|
- veersion 0.1
- -add a virtualdisk by selecting a raw image file (hardcoded : offset=0, id=0, bytes/sector=512)
- -remove the virtualdisk #0
- -check if the arsenal driver is installed
- -query the arsenal drive #0 to retrieve the id and filename of the virtualdisk
- version 0.2
- -can add more than one virtualdisk
- -will remove all virtualdisks
- -will list all virtualdisks
- -install the (storport only) driver using devcon (NOT included in the package)
- -check if the driver is installed
- version 0.3
- -handles the xp installation : will add the driver and start the service
- -for win7 (and up) installation : will use devcon if existing in the folder or will advise to use the "add legacy hardware" wizzard
- -when pointing to a non existing img file, the app will then ask for the size of the new virtualdisk and will create the imagefile,
- so one can create a virtualdisk from an existing raw image or create the raw image on the fly.
- version 0.4
- -cosmetic work
- version 0.5
- -Can now make a virtualdisk out of memory.
- It does not use awealloc for now.
- I could make it an option if needed.
- version 0.6
- -after a memory drive is created, the app will propose to initialise the drive (i.e createdisk+createpartition).
- After this, windows will propose to format it.
- -The interface also displays the mathing physicaldrive using IOCTL_SCSI_GET_ADDRESS
- -new program icon.
- version 0.7
- -new name : imgmount
- -When clicking add (file) icon, user can choose 'add existing' or 'new'
- -When clicking memory icon, user can choose 'add existing' (from file) or 'new'
- -When adding a new file, ImgMount will also initialize the disk (and will still for now rely on windows wizard to format it)
- version 0.8
- -Now supports physical memory usage (vs virtual memory) thru awealloc.
- version 0.9
- -added an uninstall option (no reboot needed for win7 and up)
- -have updated XP driver with inf file from Bilou_Gateux
- -install and uninstall now both use devcon.exe from MS
- version 1.0
- -support sharedmemory proxy thru devio
- ->devio shm:disk \\.\PhysicalDriveX 0 0 or devio shm:disk c:\disk.img 0 0
|